AISIN CRT-021 clutch slave cylinder for the 1985-1987 Toyota Land Cruiser 6-cylinder 4.2L uses hydraulic pressure to push the clutch release mechanism. It is an OE manufactured cylinder in the standard replacement grade.
A clutch pedal that feels soft or sinks, trouble getting into gear and fluid around the slave cylinder can be signs of a worn unit. With the engine off, look at the level in the clutch fluid reservoir first. A level that keeps dropping points to a leak somewhere in the system, so find which part is leaking before you replace this one.
This clutch slave cylinder fits the 1985-1987 Toyota Land Cruiser 6-cylinder 4.2L, which takes one.
Fit and size
Build and materials
One clutch slave cylinder with its push rod. It is not pre-filled with fluid.
Interchange: 31470-60100 · 31470-60101 · 31470-60102
This part cross-references / interchanges with the following part numbers:
Is this AISIN clutch slave cylinder right for the 1985-1987 Toyota Land Cruiser 6-cylinder 4.2L?
Yes. AISIN CRT-021 fits the 1985-1987 Toyota Land Cruiser 6-cylinder 4.2L, and that engine takes one.
Does this slave cylinder come with a push rod, and is it filled with fluid?
Yes, the push rod is included. No, the cylinder is not pre-filled with fluid.
What bore size does this AISIN slave cylinder have?
The AISIN CRT-021 has a bore diameter of 0.81 in (20.574 mm) and an inlet diameter of 0.39 in. It is bolt-on, with 2 mounting holes.
What are the body and seals of this clutch slave cylinder made of?
The body is cast iron with an anodized and Kanigen plated finish. The seals are high-heat ethylene propylene.
Does AISIN CRT-021 replace 31470-60101?
Yes. AISIN CRT-021 is listed as a replacement for 31470-60101.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
