AISIN Transfer Case Actuator P/N:SAT-013
AISIN SAT-019 transfer case actuator for the 2003-2009 Toyota 4Runner V6 4.0L and other vehicles shifts the transfer case between 2WD and 4WD.
A 4WD mode that will not engage, a High-to-Low change that does not complete or a 4WD warning light can have several causes. The transfer case switch, the wiring or the transfer case itself can be behind them too, so find the cause before you buy an actuator. If a failed actuator is the cause, this part replaces it.
This transfer case actuator fits the 2003-2009 Toyota 4Runner V6 4.0L and the 2005-2007 Toyota Sequoia, one per vehicle. It is an OE manufactured direct replacement for both.
Interchange: 35410-35091 · 35410-35092 · 35410-35093 · 36410-35090
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is SAT-019 a transfer case actuator for the 2005-2007 Toyota Sequoia?
Yes. AISIN SAT-019 fits the 2005-2007 Toyota Sequoia, and each Sequoia takes one.
What does the AISIN transfer case actuator control?
It handles the shift from 2WD to 4WD, the 4WD High to Low change and/or the differential lock function.
Does this actuator replace number 35410-35091?
Yes. AISIN SAT-019 is a replacement for number 35410-35091.
Can a 4WD that won't engage come from a bad transfer case actuator?
It can, because the actuator controls the shift, but other causes are possible. Testing the shift system needs the vehicle running, so a shop can do it.
Is this transfer case actuator OE manufactured?
Yes. It is an OE manufactured direct replacement shift and lock actuator.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.