Anchor Drive Shaft Center Support Bearing P/N:6095
$61.99
(You save)
Quiet a droning, vibrating driveline and keep the two-piece driveshaft properly supported with the Anchor Drive Shaft Center Support Bearing 6095. It supports the driveshaft between the transmission and differential, relieving stress on driveline components, and drops in as a direct-fit replacement for the listed Mercedes-Benz applications — including the 1998-2003 and 2007-2009 ML320, 2003-2012 ML350, 1998-2001 ML430, 2010-2011 ML450, 2002-2012 ML500, 2000-2003 ML55 AMG, 2008-2012 ML550, and 2007-2012 ML63 AMG (engine: All). See the Buyer's Guide tab for the full list.
Sealed round bearing: a sealed, round center bearing with a 30 mm (1.1811 in) inside diameter, ready to install.
Vibration-damping cushion: a high-grade rubber cushion of natural and Styrene Butadiene rubber that dampens vibration and helps absorb overloads while resisting wear and staying stable as it ages.
Strong housing & bond: a heavy-gauge steel housing frame with a Chemlock® bonding agent for a strong rubber-to-metal bond.
Mounting: bolt-hole center-to-center of 102 mm (4 in) and a center-line-to-mounting-surface length of 63 mm (2.48 in).
Any included fasteners are hardened steel with heat-treated Grade-5 bolts. Standard-replacement grade. Country of origin: China.
It supports the driveshaft between the transmission and differential, relieving stress on driveline components while its rubber cushion dampens vibration.
What vehicles does the Anchor 6095 fit?
It is a direct-fit replacement for listed Mercedes-Benz models including the ML320, ML350, ML430, ML450, ML500, ML55 AMG, ML550, and ML63 AMG. Check the Buyer's Guide tab for years and details.
Is the bearing sealed?
Yes. It uses a sealed, round center bearing and is ready to install.
What are signs this center support bearing may need replacing?
Signs can include driveline vibration, a clunk or shudder on acceleration, and cracked or separated support rubber. Diagnose the cause before replacing.
Does it include mounting fasteners?
Any included fasteners are hardened steel with heat-treated Grade-5 bolts. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Write a Review
Anchor
Anchor Drive Shaft Center Support Bearing P/N:6095
Keep the driveshaft turning smoothly and cut driveline vibration with the Anchor Drive Shaft Center Support Bearing 6035, a CENTER-mounted support that carries the driveshaft between the transmission...
Keep your driveshaft spinning smoothly and take the load off your driveline with the Anchor Drive Shaft Center Support Bearing 6040. Mounted at the center position, it supports the driveshaft between...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
