Anchor 9738 rear engine mount for the 2000-2001 Nissan Maxima V6 3.0L is a motor mount that supports the engine and dampens vibration.
- Engineered with a CAD/CAM process for consistent quality
- Natural and Styrene Butadiene rubber that resists wear and stays stable as it ages
- Chemlock® bonding agent for the rubber-to-metal bond
- Rubber hardness (Durometer) is set to the vehicle application
- Cast steel mount with a painted, semi-gloss finish
Quick facts
- Part: Anchor 9738 engine mount
- Fits: 2000-2001 Nissan Maxima V6 3.0L
- Position: Rear
- Material: Steel
- Condition: New
A worn mount can show up as a clunk when you accelerate, decelerate or shift, vibration at idle, or rubber that is cracked or separated from the metal. Before you replace it, rule out the other mounts and suspension parts, which can make a similar clunk or vibration.
Fits
This rear motor mount is a direct-fit replacement for the 2000-2001 Nissan Maxima V6 3.0L, and that car takes one.
Specifications
Fit and size
- Position: Rear
- Quantity per vehicle: 1
- Mounting hole diameter: 12 mm (0.47 in)
- Mounting hole quantity: 9
Build and materials
- Construction: Cast
- Mount material: Steel
- Bushing material: Rubber
- Finish: Painted, semi-gloss
- Grade: Standard replacement
- Condition: New
- Warranty: Anchor 12-month warranty
- Country of origin: China
In the box
One engine mount. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts rather than reusing the old ones.
Interchange: 617338 · A7373EL · 113202Y101 · C7373EL · 3812EL · EM5846
This part cross-references / interchanges with the following part numbers:
617338, A7373EL, 113202Y101, C7373EL, 3812EL, EM5846
Frequently Asked Questions
Is Anchor 9738 the rear Maxima engine mount for a 2000-2001 Nissan Maxima V6 3.0L?
Yes. Anchor 9738 is a rear engine mount for the 2000-2001 Nissan Maxima V6 3.0L, and that car takes one.
Does Anchor 9738 come with bolts or a bracket?
No. Anchor 9738 is the engine mount alone. Mounting hardware, a mounting bracket and a heat shield are not included, so plan on new bolts.
What rubber do Anchor engine mounts use?
This rear mount uses natural and Styrene Butadiene rubber, joined to the metal with Chemlock® bonding agent. The rubber is made to a specific Durometer (hardness) for the application.
Can a worn rear engine mount cause a clunk when shifting?
Yes. A worn mount can clunk on acceleration, deceleration or shifting, or vibrate at idle. A shop can confirm which part is making the noise.
How big are the mounting holes on Anchor 9738?
The mounting holes on Anchor 9738 are 12 mm (0.47 in) in diameter, and the mount has 9 of them.
