Arnott Industries AS-2892 front right air suspension strut for the 2003-2018 Bentley Continental and other vehicles combines an air spring and a shock absorber in one assembly. It replaces the OE strut and is new.
- Custom-tuned shock absorber with an elongated piston that removes the need for a reservoir
- Heavy-duty air sleeve from ContiTech, protected by an aluminum can
- CNC-machined top mount made from aircraft-quality aluminum
- Seals, O-rings, bump stop, heavy-duty crimping rings, air fitting, connector valve and dust boot
- Multi-ply ContiTech air spring bladder that maintains air pressure for consistent ride height
Quick facts
- Part: Arnott Industries AS-2892 air suspension strut
- Fits: 2003-2018 Bentley Continental and other vehicles
- Position: Front right
- Condition: New
A car that sits low on one corner, a harsh or floaty ride and a leaking air spring can all be signs of a worn air strut. Before you replace it, rule out an air line, fitting or compressor problem that could cause the same low corner. This listing is one strut for the front right, and both front sides are normally replaced together; the car takes one on each side of the front axle.
Fits
This strut is a direct-fit replacement for the 2003-2018 Bentley Continental, the 2013 Bentley Flying Spur and the 2004-2006 Volkswagen Phaeton.
Specifications
Fit and size
- Position: front right
- Quantity per vehicle: 1
- Upper mount type: stud
- Lower mount type: clevis
- Body end measuring point: center eye
- Shock absorber rod end measuring point: shoulder of stud
Build and materials
- Condition: new
- Internal damper type: hydraulic, gas charged
- Spring rate type: progressive
- Air adjustable: yes
- Adjustable damping: no
- Country of origin: United States
In the box
One front right air suspension strut with mounting hardware, spring isolators, an upper mounting isolator, heavy-duty crimping rings and a dust boot. A spring seat, bearing plate and lower mounting isolator are not included.
Installation notes
- Comes pre-assembled for easy installation.
- Detailed installation instructions are available.
Frequently Asked Questions
Is the Arnott AS-2892 air strut right for the 2003-2018 Bentley Continental?
Yes. Arnott Industries AS-2892 is a front right strut for the 2003-2018 Bentley Continental. The front left side takes its own separate strut.
Does the AS-2892 come with mounting hardware?
Yes. Mounting hardware, spring isolators, an upper mounting isolator, crimping rings and a dust boot come with this strut. The spring seat, bearing plate and lower mounting isolator are not included.
Is the damping adjustable on this front right air strut?
No. Damping and compression are fixed. The shock is hydraulic and gas charged, and the strut itself is air adjustable.
How do I spot a worn or leaking air strut at the front right?
With the car parked and the engine off, look for a cracked or torn dust boot, an oil-wet shock or one corner sitting lower than the other. A shop can pressure-test the air system.
Does the Arnott AS-2892 strut need assembly before installing?
No. Arnott Industries AS-2892 comes pre-assembled, and detailed installation instructions are available.
