Arnott Industries Suspension Strut P/N:MR-3855
Arnott Industries MR-3839 front suspension strut for the 2015-2018 Chevrolet Silverado 1500 and other vehicles damps front-wheel movement as part of an active magnetic suspension. It is a magnetically controlled strut with OES design and components.
A worn or leaking strut can show up as fluid on the strut body, a bouncy or harsh ride, or a clunk over bumps. Before replacing it, look the strut body over for fluid with the engine off; if the strut is the cause, this one replaces it, and a shop can test the electronic side.
This strut is a direct replacement for the GM MagneRide shock on the 2015-2018 GMC Sierra 1500 and the 2015-2020 Chevrolet Tahoe, and these vehicles take two. This listing is one strut; the other front side takes its own, and the pair is normally replaced at the same time. If your vehicle is not named here, find its year and model in the "Vehicles it fits" section.
Fit and size
Build and materials
One suspension strut with mounting hardware and a spring seat. Springs, spring isolators, a bearing plate and a boot are not included.
Interchange: 23151123 · 23312167 · 23464589 · 84061228 · 84176631 · 84977478
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Arnott Industries MR-3839 fit the 2015-2018 GMC Sierra 1500?
Yes. Arnott Industries MR-3839 is listed for the front of the 2015-2018 GMC Sierra 1500, and one strut fits either the left or right side. Other vehicles are in the "Vehicles it fits" section.
Does the Arnott Industries MR-3839 strut come with mounting hardware?
Yes, Arnott Industries MR-3839 includes mounting hardware and a spring seat. Springs, spring isolators, a bearing plate and a boot are not included.
What fluid is inside this magnetic ride strut?
The monotube damper is filled with magnetorheological fluid, a synthetic hydrocarbon oil containing easily magnetized iron particles. Two electromagnetic coils change its viscosity and stiffness when turned on.
How can I tell if this magnetic front strut is worn out?
Fluid on the strut body, a bouncy or harsh ride, or a clunk over bumps can mean a strut is worn. A shop can test the electronic control side.
Does the Arnott MR-3839 need modifications to connect to the ECU?
No. The Arnott MR-3839 connects to the vehicle's ECU with no modifications, and the same strut fits the left or right front side.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.