Autobest Fuel Pump Module Assembly P/N:F1516A

Be the first to review this product
$180.99
MPN: F1516A
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Autobest Fuel Pump Module Assembly P/N:F1516A
Autobest Fuel Pump Module Assembly P/N:F1516A
$180.99

Keep fuel moving to the injectors with the Autobest Fuel Pump Module Assembly F1516A, an in-tank module that draws fuel from the tank and delivers it to the engine. It installs as a direct-fit replacement for the 2009 Ford Flex [V6-3.5L], cataloged for the right-side position, and comes ready to drop in with the major components pre-assembled.

  • Complete module: includes an internal strainer, fuel filter, integrated pressure regulator, and fuel level sending unit; a fuel tank pressure sensor and mounting hardware are not included.
  • Pump output: turbine-type pump rated at about 41 GPH average flow, roughly 8 A average current draw on a 12 V system, with an operating pressure of 60–70 PSI.
  • Electrical & connections: sending unit resistance of 180 ohms empty and 10 ohms full, four male PIN terminals, and a single male trapezoid connector; 3/8 in Quick Connect outlet with a strainer inlet.
  • Materials: POM housing with FKM gaskets and seals, and improved ethanol tolerance for today's fuel blends.

If a weak or failed original pump is causing hard starts, stalling, or a no-start, replacing the module restores fuel delivery. Country of origin: China.

Interchange: 8A4Z-9H307B · 8A8Z-9H307A · PFS-413 · PFS-471
8A4Z9H307B · 8A8Z9H307A · PFS413 · PFS471 · E2505M · P76456M · FG1757 · SP2366M · SP2495M · USEP2505M

This part cross-references / interchanges with the following part numbers:

E2505M, P76456M, FG1757, 8A4Z-9H307B, 8A8Z-9H307A, PFS-413, PFS-471, SP2366M, SP2495M, USEP2505M

Frequently Asked Questions

What vehicle does the F1516A fit?

It is a direct-fit replacement for the 2009 Ford Flex with the V6-3.5L engine, cataloged for the right-side position. Always confirm fitment against the Buyer's Guide for your vehicle.

What comes in this module assembly?

It includes the pump, internal strainer, fuel filter, integrated pressure regulator, and fuel level sending unit. A fuel tank pressure sensor and mounting hardware are not included.

What are the pump's output ratings?

The turbine-type pump provides about 41 GPH average flow at roughly 8 A average draw on a 12 V system, with an operating pressure of 60–70 PSI.

What are the sending unit resistance values?

The fuel level sending unit reads 180 ohms when empty and 10 ohms when full. The module uses four male PIN terminals and a single male trapezoid connector.

What signs suggest the fuel pump may need replacing?

Hard starting, stalling, sputtering under load, or a no-start can indicate a failing in-tank pump. Diagnose the cause first, since these symptoms can have other sources.