Autobest F6050A fuel pump module for the 2012 Mazda 3 Sport 4-cylinder 2.5L, the 2012-2013 3 Sport 4-cylinder 2.0L and other vehicles moves fuel from the tank toward the engine. This in-tank turbine fuel pump assembly runs on 12V and sends fuel out through a quick-connect outlet.
- Ethanol tolerance for today's fuel systems
- Tested at every stage of manufacturing
- In-tank turbine pump with a 25.1 GPH average flow rating
- Housing made of POM
- Comes with a fuel filter, internal strainer, fuel sending unit and regulator
Quick facts
- Part: Autobest F6050A fuel pump module
- Also called: fuel pump assembly
- Fits: the 2012 Mazda 3 Sport 4-cylinder 2.5L, the 2012-2013 3 Sport 4-cylinder 2.0L and other vehicles
- Material: POM housing
- Condition: New
A worn module can show up as long cranking, stalling under load or a whine from the fuel tank, and each of those can have other causes. Before replacing it, look over its electrical connector and the nearby wiring for corrosion or damage with the engine off, since a poor connection can act like a weak pump.
Fits
It also fits the 2010-2013 Mazda 3 4-cylinder 2.0L or 2.5L. A car on this page needs just one module, and this listing is one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Size: 9.45 in long, 7.44 in wide, 5.39 in high
- Connector: 1 male rectangle, 4 male pin terminals
- Outlet: quick connect
Build and materials
- Pump type: turbine, in tank
- Housing material: POM
- Voltage: 12V
- Average flow rating: 25.1 GPH
- Pump pressure: 80 PSI minimum, 100 PSI maximum
- Fuel sending unit resistance: 398 ohms empty, 19 ohms full
- Condition: New
- Warranty: Autobest 12 month unlimited mileage warranty
- Country of origin: China
In the box
One fuel pump module with a fuel filter, internal strainer, fuel sending unit and regulator. The wire harness, fuel tank pressure sensor and gasket or seal are not included.
Interchange: LF3T-13-35XB · LF3T-13-35XD
E9049M · 66171 · P76882M · FG1286 · EI049M · SP4060M · USEP9049M
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
E9049M, 66171, P76882M, FG1286, LF3T-13-35XB, LF3T-13-35XD, EI049M, SP4060M, USEP9049M
Frequently Asked Questions
Will the Autobest F6050A fit a 2010-2013 Mazda 3 4-cylinder 2.5L?
Yes. Autobest F6050A fuel pump module fits the 2010-2013 Mazda 3 4-cylinder 2.0L or 2.5L, the 2012-2013 Mazda 3 Sport 4-cylinder 2.0L and the 2012 Mazda 3 Sport 4-cylinder 2.5L.
What parts come with the Autobest F6050A fuel pump module?
This fuel pump module comes with a fuel filter, internal strainer, fuel sending unit and regulator. The wire harness, fuel tank pressure sensor and gasket or seal are not included.
What flow rate and pressure does this Autobest fuel pump module have?
The Autobest F6050A has an average flow rating of 25.1 GPH on 12V. Its pump pressure runs from 80 PSI minimum to 100 PSI maximum.
How can I tell if the fuel pump module in my tank is failing?
Long cranking, stalling under load or a whine from the tank can be signs of a weak pump, though other faults give similar signs. A shop can test fuel pressure.
What resistance does the fuel sending unit in this module read?
The sending unit in this module reads 398 ohms when the tank is empty and 19 ohms when it is full.
