Baldwin BF1385-SPS fuel water separator filter for the 2011-2015 Capacity Of Texas TJ5000 6-cylinder 6.7L and other vehicles and equipment separates water and debris from the fuel before it reaches the engine.
- Spin-on fuel and water separator with a drain
- Sensor port with an M14 x 2.0 thread
- Reusable sensor
Quick facts
- Part: Baldwin BF1385-SPS fuel water separator filter
- Fits: 2011-2015 Capacity Of Texas TJ5000 6-cylinder 6.7L and other vehicles and equipment
- Condition: New
Hard starting, a loss of power or a water-in-fuel warning can mean the separator is clogged or full of water, though a weak fuel lift pump or a restricted fuel line can also produce them, so find the cause before you replace the filter.
Fits
This separator fits the 2011-2015 Capacity Of Texas TJ5000 6-cylinder 6.7L, the 2011 Capacity Of Texas TJ7000 6-cylinder 6.7L and the 2007-2009 Kalmar Ottawa 4 X 2 6-cylinder 5.9L, with one filter needed on each. If your machine is not named here, look it up in the "Vehicles it fits" section on this product page.
Specifications
Fit and size
- Outside diameter: 3 11/16 in (93.7 mm)
- Height: 7 3/8 in (187.3 mm)
- Thread: 1, 14 per inch
- Sensor port thread: M14 x 2.0
- Quantity per application: 1
Build and materials
- Type: spin-on fuel/water separator with drain and sensor port
- Condition: New
- Country of origin: United States
Interchange: Case 87356193 · Cummins 3973233 · Fleetguard FS19732
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Does the Baldwin BF1385-SPS fit the 2011-2015 Capacity Of Texas TJ5000 6-cylinder 6.7L?
Yes. Baldwin BF1385-SPS fits the 2011-2015 Capacity Of Texas TJ5000 6-cylinder 6.7L, one filter per machine. Other machines are in the "Vehicles it fits" section.
What thread does the sensor port on the Baldwin BF1385-SPS use?
The sensor port has an M14 x 2.0 thread. The filter's own thread is listed as 1 with 14 per inch.
Does this fuel water separator have a drain?
Yes. This spin-on fuel water separator has a drain, a sensor port and a reusable sensor.
How big is this spin-on fuel water separator?
This separator is 3 11/16 in (93.7 mm) across and 7 3/8 in (187.3 mm) tall.
Does Fleetguard FS19732 interchange with this Baldwin separator?
Yes. Fleetguard FS19732 is listed as an interchange for Baldwin BF1385-SPS, along with Case 87356193 and Cummins 3973233.
