DORMAN PREMIUM BJ90426PR front upper ball joint for the 2008-2013 Cadillac CTS joins the suspension arm to the steering knuckle as a pivot. As a suspension ball joint, it lets the wheel swivel for steering while the suspension moves with the road.
- Press-in design with a threaded, tapered stud
- Steel construction with a polychloroprene dust boot
- Replaces the failed joint alone instead of the complete assembly
- Made to strict standards with thorough quality-control measures
Quick facts
- Part: DORMAN PREMIUM BJ90426PR ball joint
- Also called: suspension ball joint
- Fits: 2008-2013 Cadillac CTS
- Position: Front upper
- Material: Steel
- Condition: New
A clunk over bumps, loose or wandering steering, or uneven front tire wear can mean a ball joint is worn, though a worn bushing or link can cause similar signs. With the engine off, look at the dust boot for tears or leaking grease before you order, and have a shop check the joint for play.
Fits
This is a direct replacement for the 2008-2013 Cadillac CTS.
Specifications
Fit and size
- Position: Front upper
- Quantity per vehicle: 2
- Maximum outside diameter: 55 mm
- Stud tapered end 1 diameter: 13.6 mm
- Stud tapered end 2 diameter: 12 mm
- Stud thread: 12 mm diameter, 1.75 mm pitch, 27 mm long
- Stud taper per foot: 2 in
- Wrench size: 12 mm
Build and materials
- Type: Press in
- Stud: Threaded, tapered
- Material: Steel
- Dust boot material: Polychloroprene
- Greaseable: No
- Grade: Standard replacement
- Condition: New
- Country of origin: Switzerland
In the box
One ball joint with its dust boot and one nut. A cotter pin, washers, castle nut, mounting bolts and grease fitting are not included, so plan on new ones if your setup calls for them. This listing holds one ball joint; the 2008-2013 Cadillac CTS takes two, so order two and fit the pair together.
Installation notes
- A ball joint press tool is normally required for installation.
Interchange: 15219467 · 15219468 · 25849157 · 25849158
This part cross-references / interchanges with the following part numbers:
15219467, 15219468, 25849157, 25849158
Frequently Asked Questions
Is the DORMAN PREMIUM BJ90426PR ball joint right for the 2008-2013 Cadillac CTS?
Yes. DORMAN PREMIUM BJ90426PR is a front upper ball joint that fits the 2008-2013 Cadillac CTS, and the vehicle takes two of them.
Does this ball joint come with a cotter pin or castle nut?
No. The box holds one ball joint with its dust boot and one nut. A cotter pin, washers, castle nut, mounting bolts and grease fitting are not included.
What thread size is on the BJ90426PR ball joint stud?
The stud is threaded and tapered, with a 12 mm thread at 1.75 mm pitch and 27 mm of thread length. The wrench size is 12 mm.
Do I need a press to install this press-in ball joint?
Yes, DORMAN PREMIUM BJ90426PR is a press-in joint, and a ball joint press tool is normally needed to seat it. The nut is already in the box.
Can a torn dust boot mean a front upper ball joint is wearing out?
It can. A torn boot, a clunk over bumps or uneven tire wear can go with a worn joint. Have a shop inspect it promptly rather than keep driving on it.
