Beck/Arnley 103-2714 front inner CV joint boot kit for the 1999-2005 Honda Odyssey and other vehicles keeps grease in the CV joint and dirt out.
- Application-specific boot, not a universal one
- Grease with an extreme pressure additive
Quick facts
- Part: Beck/Arnley 103-2714 CV joint boot kit
- Fits: 1999-2005 Honda Odyssey and other vehicles
- Position: front inner, front left inner, front right inner
- Condition: New
A split boot you can see, grease spatter around the joint, or a clicking noise on turns can mean the boot or joint is worn. A worn wheel bearing or an out-of-balance tire can produce similar noise or vibration, so find the cause before you replace the boot.
Fits
Fits include the 1999-2005 Honda Odyssey, the 2003-2004 Honda Pilot, the 1995-1996 Mazda Millenia and the 1997-2002 Millenia V6-2.3L. The kit matches OE form, fit and function. This listing is one kit; the Honda models take one each, while the Mazda takes two. Many more vehicles are covered, so open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: front inner, front left inner, front right inner
- Quantity per vehicle: 1 or 2, depending on the vehicle
Build and materials
- Type: boot kit with grease and clamps
- Condition: New
In the box
One CV joint boot kit with the boot, grease and clamps.
Installation notes
- Not intended for installation tools that stretch the small end of the boot over the CV joint.
Interchange: F02Z3A331C · 42318003555 · CV8414 · G06522540A · G06522540A9U · DX663 · 8162944
This part cross-references / interchanges with the following part numbers:
F02Z3A331C, 42318003555, CV8414, G06522540A, G06522540A9U, DX663, 8162944
Frequently Asked Questions
Is the Beck/Arnley 103-2714 kit right for the 2003-2004 Honda Pilot?
Yes. Beck/Arnley 103-2714 fits the 2003-2004 Honda Pilot, which takes one front inner CV joint boot kit. For other models, open the "Vehicles it fits" section.
Does the Beck/Arnley CV boot in this kit come with grease and clamps?
Yes. The kit includes the boot, grease and clamps, and the grease contains an extreme pressure additive.
Is the 103-2714 boot kit universal or made for a specific application?
It is application specific, not universal. Beck/Arnley 103-2714 is listed for the front inner position, left and right.
What happens when the boot on a CV joint tears?
A torn boot lets grease escape and lets dirt and water reach the joint, which can wear it. A clicking noise on turns can follow.
Can I use a boot-stretching tool with this CV boot kit?
No. This kit is not intended for installation tools that stretch the small end of the boot over the CV joint.
