Beck/Arnley 158-0711 fuel injection pressure regulator for the 1996-1998 Hyundai Elantra 4-cylinder 1.8L, the 1999-2000 Elantra 4-cylinder 2.0L and other vehicles controls the fuel pressure delivered to the injectors.
- Application-specific design
- Made with high quality material and componentry
- Construction aimed at durability
Quick facts
- Part: Beck/Arnley 158-0711 fuel injection pressure regulator
- Fits: the 1996-1998 Hyundai Elantra 4-cylinder 1.8L, the 1999-2000 Elantra 4-cylinder 2.0L and other vehicles
- Condition: New
When a regulator stops holding pressure, you may notice hard starting, a rough idle or poor fuel economy. A weak fuel pump, a clogged fuel filter or a leaking injector can be behind those symptoms too, so work out which part is at fault before you buy a replacement.
Fits
This regulator matches OE form, fit and function on the 1996-1998 Hyundai Elantra 4-cylinder 1.8L, the 1999-2000 Elantra 4-cylinder 2.0L, the 1997 Hyundai Tiburon 4-cylinder 1.8L and the 1997-2001 Tiburon 4-cylinder 2.0L. A 1997-2001 Hyundai Tiburon 4-cylinder 2.0L takes one regulator, and this listing is one.
Specifications
- Quantity per vehicle: 1
- Condition: New
Interchange: 5G1186 · 3530123002 · PR308 · PR4089
This part cross-references / interchanges with the following part numbers:
5G1186, 3530123002, PR308, PR4089
Frequently Asked Questions
Is the Beck/Arnley 158-0711 regulator right for the 1999-2000 Hyundai Elantra 4-cylinder 2.0L?
Yes. Beck/Arnley 158-0711 is made for the 1999-2000 Hyundai Elantra 4-cylinder 2.0L, and it also covers the 1996-1998 Elantra 4-cylinder 1.8L.
Does this fuel injection pressure regulator fit a 1997 Hyundai Tiburon 4-cylinder 1.8L?
Yes. The 1997 Hyundai Tiburon 4-cylinder 1.8L is covered, as is the 1997-2001 Tiburon 4-cylinder 2.0L, and each takes one regulator.
Is Beck/Arnley 158-0711 interchangeable with PR308?
Yes. PR308 is one of the numbers Beck/Arnley 158-0711 replaces, along with 5G1186, 3530123002 and PR4089.
Could hard starting or a rough idle mean a fuel injection pressure regulator is failing?
They can go with a regulator that is not holding pressure. If the regulator is at fault, this fuel injection pressure regulator replaces it.
Is this Beck/Arnley fuel injection pressure regulator a universal part?
No. It is application specific, made with high quality material and componentry, and its construction is aimed at durability.
