Beck/Arnley 159-1089 fuel injector for the 2009-2019 Toyota Corolla 4-cylinder 1.8L and other vehicles sprays fuel into the engine for combustion. Each injector opens and closes to meter the fuel the engine burns.
- Beck/Arnley fuel injectors are application specific, made with attention to form and function
- Replacing every injector in the engine is advised for performance
- Any injectors that are re-used should be professionally cleaned and flow tested
Quick facts
- Part: Beck/Arnley 159-1089 fuel injector
- Fits: 2009-2019 Toyota Corolla 4-cylinder 1.8L and other vehicles
- Condition: New
A rough idle, a misfire or hard starting may come from a clogged or leaking injector, or from ignition or other fuel parts. So with the engine off and cool, start by looking over the injector and its connector for cracks, seepage or damage, and leave flow testing to a shop.
Fits
This fuel injector replacement fits the 2009-2019 Toyota Corolla 4-cylinder 1.8L, the 2009-2013 Toyota Matrix 4-cylinder 1.8L and the 2008-2009 Scion xD 4-cylinder 1.8L, and it matches OE form, fit and function.
Specifications
- Quantity per application: 1
- Engine: L4-1.8L
- Condition: New
In the box
One fuel injector. The fitment lists a quantity of 1 per application.
Installation notes
- Review the vehicle owner manual for fuel grade requirements and the vehicle service manual for instructions and safety precautions.
Interchange: 2204588476 · FJ1068 · 2320909140 · 2320939140 · 2320939145 · 232500T020 · WP1182732ITM
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
2204588476, FJ1068, 2320909140, 2320939140, 2320939145, 232500T020, WP1182732ITM
Frequently Asked Questions
Is the Beck/Arnley 159-1089 right for the 2008-2009 Scion xD 4-cylinder 1.8L?
Yes. Beck/Arnley 159-1089 is listed for the 2008-2009 Scion xD 4-cylinder 1.8L (L4-1.8L), with a quantity of 1 per application.
Can I reuse my other old injectors alongside this new fuel injector?
Re-used injectors should be professionally cleaned and flow tested first. For best performance, replace all injectors in the engine.
Does the 159-1089 listing include more than one injector?
No. Beck/Arnley 159-1089 is one new fuel injector, and the fitment lists a quantity of 1 per application.
Could a rough idle or misfire on a 1.8L engine mean a bad fuel injector?
It can. A clogged or leaking injector may cause a rough idle, a misfire or poor fuel economy, and a shop can flow test it.
Where do I find fuel grade and safety information for installing this injector?
The vehicle owner manual covers fuel grade requirements. The vehicle service manual gives installation instructions and safety precautions.
