Bosch 66095 fuel pump module for the 2013-2018 Ford Focus 4-cylinder 2.0L delivers fuel from the tank to the injection system. This in-tank electric module, also called a fuel pump assembly, combines the pump with a fuel sending unit, filter and strainer.
- Patented Turbine Pump technology that virtually eliminates fuel pulsation, noise and hot-start problems of older pump designs
- Two layers of filtration protect the pump from debris and fuel system contamination
- Electromagnetic shielding stops the pump from interfering with on-board electronics
- Designed to operate in extreme temperatures and under low fuel conditions
- Function tested at the end of the line and tested to a minimum lifetime of 150k miles
Quick facts
- Part: Bosch 66095 fuel pump module
- Also called: fuel pump assembly
- Fits: 2013-2018 Ford Focus 4-cylinder 2.0L
- Material: Mixed
- Condition: New
Long cranking, sputtering or a loss of power under load can mean the pump is wearing out. These signs alone do not prove the module is the problem, since a clogged fuel filter can look much the same. If the module is the cause, this assembly replaces the pump, sending unit and filter in one piece.
Fits
This fuel pump module is a direct-fit replacement for the 2013-2018 Ford Focus 4-cylinder 2.0L.
Specifications
Fit and size
- Quantity per vehicle: 1
- Pieces: 1 fuel pump module
- Outside diameter: 10 mm
- Thickness: 1.5 mm
- Port quantity: 2
- Mounting type: In-tank
Build and materials
- Pump type: Electric, self-priming
- Material: Mixed
- Gasket or seal material: Synthetic or NBR rubber
- Strainer attachment: Push on
- Connector gender: Female; terminal gender: Male
- Condition: New
In the box
One fuel pump module with a fuel sending unit, filter, strainer and O-ring. The 2013-2018 Ford Focus 4-cylinder 2.0L takes one. A lock ring, wiring harness and suction pipe are not included, so plan on getting a lock ring separately.
Installation notes
- Designed for simple plug-and-play installation.
Frequently Asked Questions
Is Bosch 66095 the fuel pump module for the 2013-2018 Ford Focus 4-cylinder 2.0L?
Yes. Bosch 66095 is a direct-fit fuel pump module for the 2013-2018 Ford Focus 4-cylinder 2.0L, and that engine takes one.
What comes with the Bosch 66095 fuel pump module?
One fuel pump module with a fuel sending unit, filter, strainer and O-ring. The lock ring, wiring harness and suction pipe are not included.
Does this fuel pump module sit inside the tank?
Yes. It is an in-tank electric module with two ports, a push-on strainer and a self-priming pump.
What symptoms can a worn fuel pump module cause?
Hard starting, stalling or a whine from the tank can be signs of a worn pump. A shop can test fuel pressure to confirm.
Is this Bosch fuel pump module plug-and-play?
Yes. It is designed for simple plug-and-play installation, with a female connector and a male terminal.
