Bosch Oxygen Sensor P/N:13559
Bosch 13511 oxygen sensor for the 2004-2005 Suzuki Forenza 4-cylinder 2.0L and other vehicles reads the oxygen content of the exhaust and reports it to the ECU. This downstream, heated narrow-band sensor gives the ECU air-fuel-ratio readings that help control combustion and emissions.
A failing oxygen sensor can show up as a check engine light, poorer fuel economy or a rough idle. These signs alone do not prove the sensor is at fault, since an exhaust leak can skew the readings too.
This is a downstream oxygen sensor for the 2004-2005 Suzuki Forenza 4-cylinder 2.0L and the 2005 Suzuki Reno 4-cylinder 2.0L, a direct-fit replacement for both.
Fit and size
Build and materials
One oxygen sensor with its wiring harness. You get one sensor, which is the quantity the fitment calls for per vehicle. No mounting bracket or other accessories are included.
Is this Bosch O2 sensor upstream or downstream?
The Bosch 13511 O2 sensor is a downstream sensor. It is a heated, narrow-band type.
Does the Bosch 13511 fit the 2005 Suzuki Reno 4-cylinder 2.0L?
Yes. Bosch 13511 is listed for the 2005 Suzuki Reno 4-cylinder 2.0L as well as the 2004-2005 Suzuki Forenza 4-cylinder 2.0L.
Is this Bosch premium oxygen sensor narrow-band or wideband?
It is a narrow-band, heated switching-type sensor. It has a 22 mm hex and M18 - 1.5 threads.
Does this oxygen sensor come with a wiring harness?
Yes, the sensor comes with its wiring harness. A mounting bracket and other accessories are not included.
Do the threads on the Bosch 13511 already have anti-seize on them?
Yes. Conductive anti-seize is pre-applied to the threads, and the connectors are built for quick installation.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.