Dorman - First Stop Brake Hydraulic Hose P/N:H621789
Keep hydraulic pressure moving from the brake lines to the wheel with this Dorman brake hydraulic hose, part number H380556, from the Dorman First Stop line and built for the front right position. It fits many vehicles, among them the 1997-2003 Ford F-150, 1997-1999 Ford F-250 and 1997-2002 Ford Expedition. See the "Vehicles it fits" section for the full list and engine details.
Dorman engineered this hose to perform like the factory brake hose on specific vehicles and positions, as part of a complete brake repair. A flexible brake hose carries pressurized brake fluid between the rigid chassis lines and the brake at the wheel, and it flexes as the suspension moves.
Signs that a brake hose may need replacing include cracked, bulging or swollen rubber, fluid seepage at the fittings, or a soft or spongy brake pedal. Inspect the hose on the opposite side as well. Bleed the brake system after installation. Consult the vehicle service information for the correct fasteners and whether they may be reused.
Interchange: 87-42115 · HB-85115 · 150.65115 · 350-54346
8742115 · HB85115 · 15065115 · 35054346 · 18J1646 · B916851 · 610088 · 78515 · BH178515 · F65Z2078BA · XL3Z2078BB · XL3Z2078CB · YL3Z2078BB · NF380556 · BH380556 · 2201240 · BH138045 · F138045
This part cross-references / interchanges with the following part numbers:
What does a brake hydraulic hose do?
It carries pressurized brake fluid from the vehicle's rigid brake lines to the brake at the wheel, and it flexes as the suspension moves. H380556 is built for the front right position.
Which vehicles does this Dorman brake hose fit?
It fits many vehicles, including the 1997-2003 Ford F-150, 1997-1999 Ford F-250 and 1997-2002 Ford Expedition. Check the "Vehicles it fits" section for the full list.
What is the hose made of?
Dorman lists EPDM rubber with specially coated, corrosion-resistant fittings. It also states that the materials are tested to government-regulated safety and durability standards.
What are signs a brake hose may need replacing?
Cracked, bulging or swollen rubber, fluid leaking at the fittings, or a soft, spongy pedal may indicate a worn hose. Diagnose the brake system to confirm the cause before replacing parts.
Is anything required after installing it?
Yes. The brake system must be bled after a hose is replaced. Follow the vehicle service information for the procedure and torque values, and for the correct fasteners and whether they may be reused.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.