Front Left CV Axle for 2009-2012 Ford Escape & More - CARDONE New 66-2249

$146.99

Vehicles this part fits

    Part number: 66-2249
    UPC: 884548130173
    Condition: New
    Weight: 15.50 LBS
    Item Package Code: EA
    Part Has Core (Y/N): N
    Item Package Quantity: 1
    $146.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE New CV Axle Assembly P/N:66-2249
    CARDONE New CV Axle Assembly P/N:66-2249
    $146.99
    $146.99

    CARDONE New 66-2249 front left CV axle for the 2009-2012 Ford Escape and other vehicles carries engine torque from the transmission to the front left wheel hub. It is a complete axle with its CV joints, designed to avoid the failures that typically affect original CV axles.

    • Neoprene boots with additional bellows, when needed, to resist bellow stress and ozone cracking
    • Axle shaft checked individually for straightness, for vibration-free performance at all speeds
    • Axle measurements validated after assembly
    • Boot clamps pneumatically crimped to seal the boot to the housing
    • Grease that withstands high-temperature and high-torque demands
    • Splines and threads are precision rolled, and the transmission seal diameter is precision-machined after heat treatment

    Quick facts

    • Part: CARDONE New 66-2249 CV axle
    • Also called: CV axle assembly
    • Fits: 2009-2012 Ford Escape and other vehicles
    • Position: Front left
    • Material: Steel shaft, neoprene boots
    • Condition: New

    Clicking or snapping when you turn with the wheel cut hard, a thump or vibration when you accelerate, or grease thrown from a torn boot onto the suspension can mean the axle is worn. These signs alone do not prove the axle is the problem, since a broken engine mount can also bind the inner joint.

    Fits

    The front left side of the 2009-2012 Ford Escape, the 2009-2011 Mazda Tribute and the 2009-2011 Mercury Mariner needs one axle. This listing is that single front-left axle; the front right is a separate part, normally replaced at the same time.

    Specifications

    Fit and size

    • Position: Front left
    • Quantity per application: 1 (front left)
    • Shaft diameter: 28 mm (1.102 in)
    • Compressed length: 652.78 mm (25.7 in)
    • Inboard spline quantity: 35
    • Outboard spline quantity: 28
    • Axle nut thread: M22x1.5
    • Axle nut socket size: 32 mm (1.26 in)
    • Axle nut length: 19 mm (0.748 in)

    Build and materials

    • Condition: New
    • Shaft material: Steel
    • Boot material: Neoprene, 5 ribs
    • ABS tone ring: included, toothed, 44 teeth
    • CV joints: included
    • Axle nut: hex, included
    • Country of origin: China

    In the box

    One complete CV axle with its CV joints, a new axle retaining nut and an instruction sheet.

    Installation notes

    • Remove and install one axle at a time, and never let the axle hang unsupported, which can separate it and damage the inner joint.
    • Tighten the new retaining nut with a torque wrench to the manufacturer's specification; never use an impact wrench.
    • Always install new transaxle seals when replacing the axle, to avoid leaks.

    Interchange: 9L8Z3A427A · 9L8Z3A427B · 9L8Z3A427C · 9L8Z3A427D · ZZDA2560X · ZZDA2560XA · ZZDA2560XC

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    9L8Z3A427A, 9L8Z3A427B, 9L8Z3A427C, 9L8Z3A427D, ZZDA2560X, ZZDA2560XA, ZZDA2560XC

    Frequently Asked Questions

    Is this the front axle for the 2009-2012 Ford Escape?

    Yes. CARDONE New 66-2249 is the front left CV axle for the 2009-2012 Ford Escape. The front right side is a separate part.

    Does the CV axle assembly come with a new axle nut?

    Yes. The box holds the complete axle with its CV joints, a new hex axle nut and an instruction sheet.

    What are the shaft diameter and compressed length of CARDONE 66-2249?

    CARDONE New 66-2249 has a 28 mm (1.102 in) shaft and measures 652.78 mm (25.7 in) compressed. It has 35 inboard splines and 28 outboard splines.

    What should I do with the old locking axle nut?

    Discard the old nut and fit the new one supplied, because a prevailing torque lock nut is a single-use part. Tighten the new nut with a torque wrench, not an impact wrench.

    Should I install new transaxle seals with this CV axle?

    Yes. When replacing a CV axle such as CARDONE New 66-2249, always install new transaxle seals to avoid leaking. Remove and install one axle at a time.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review