Remanufactured Engine Control Module (Ecm) for 1999-2000 Ford Escort - A1 CARDONE 78-9033F

$236.99

Vehicles this part fits

    Part number: 78-9033F
    UPC: 082617738071
    Weight: 2.00 LBS
    Item Package Quantity: 1
    $236.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Engine Control Module (ECM) P/N:78-9033F
    CARDONE Reman Engine Control Module (ECM) P/N:78-9033F
    $236.99
    $236.99

    A1 CARDONE 78-9033F engine control module (ecm) for the 1999-2000 Ford Escort 4-cylinder 2.0L controls the engine and is a remanufactured unit. This remanufactured A1 CARDONE ecm is flashable, so it can be programmed for the vehicle.

    • Reverse engineering shows why the original unit failed, so design weaknesses can be corrected
    • Critical components are re-soldered or replaced, and the re-soldering helps prevent intermittent failures
    • Each unit is 100% computer tested, using automated equipment or a bench test depending on application
    • On-car vehicle validation tests durability and performance

    Quick facts

    • Part: A1 CARDONE 78-9033F engine control module (ecm)
    • Fits: 1999-2000 Ford Escort 4-cylinder 2.0L
    • Condition: Remanufactured

    A check engine light that returns after resetting, an engine that shuts off for no reason or intermittent starting problems can mean the module has failed. Poor grounds or power, a damaged wiring harness and short-circuited solenoids or relays can sit behind those signs as well, so find out what failed before you buy a replacement module. If the module is the cause, this one replaces it.

    Fits

    It fits the 1999-2000 Ford Escort 4-cylinder 2.0L. This listing is one module, and that engine takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Terminals: 104 male pins
    • Connector: 1 rectangular female connector
    • Length: 8 in
    • Width: 6.1 in (154.94 mm)
    • Height: 1.6 in

    Build and materials

    • Condition: Remanufactured
    • Grade: Standard Replacement
    • Flashable: Yes
    • Removable PROM: No
    • Country of origin: Mexico

    In the box

    One module and one instruction sheet. Mounting hardware is not included.

    Installation notes

    • The module needs to be properly flash programmed for the vehicle.
    • A vehicle with the Ford passive anti-theft system requires an on-car relearn.
    • Not every Ford requires a PATS reset; the PATS chart on the O.E. manufacturer's service site covers each application.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the A1 CARDONE 78-9033F engine control module fit the 1999-2000 Ford Escort 4-cylinder 2.0L?

    Yes, the A1 CARDONE 78-9033F engine control module fits the 1999-2000 Ford Escort 4-cylinder 2.0L, and that car takes one.

    Yes. The A1 CARDONE 78-9033F fits the 1999-2000 Ford Escort 4-cylinder 2.0L, and that engine takes one module.

    Does the 78-9033F module come with mounting hardware?

    No. The listing includes the module and an instruction sheet, but mounting hardware is not included.

    It comes with an instruction sheet, but mounting hardware is not included. The package holds the module and the sheet.

    Does this remanufactured ecm come with an instruction sheet and mounting hardware?

    No. The listing includes the module and an instruction sheet, but mounting hardware is not included.

    It comes with an instruction sheet, but mounting hardware is not included. The package holds the module and the sheet.

    How many terminals does the connector on the 78-9033F module have?

    The A1 CARDONE 78-9033F has one rectangular female connector with 104 male pin terminals.

    The A1 CARDONE 78-9033F has 104 male pin terminals. It uses one rectangular female connector.

    How many pins does the A1 CARDONE 78-9033F ecm have?

    The A1 CARDONE 78-9033F has one rectangular female connector with 104 male pin terminals.

    The A1 CARDONE 78-9033F has 104 male pin terminals. It uses one rectangular female connector.

    What signs can mean a remanufactured ECM is failing?

    A check engine light that stays on after a reset, the engine shutting off for no reason or intermittent starting problems can mean the module is failing. A shop can run the tests to confirm.

    Not every Ford requires a PATS reset, but a vehicle with the Ford passive anti-theft system needs an on-car relearn. The PATS chart on the O.E. manufacturer's service site covers each application.

    Does a Ford engine control module need a PATS relearn after installation?

    A check engine light that stays on after a reset, the engine shutting off for no reason or intermittent starting problems can mean the module is failing. A shop can run the tests to confirm.

    Not every Ford requires a PATS reset, but a vehicle with the Ford passive anti-theft system needs an on-car relearn. The PATS chart on the O.E. manufacturer's service site covers each application.

    Does this remanufactured ECM need to be programmed after installation?

    Yes. The module is flashable and has to be properly flash programmed for the vehicle. A Ford with the passive anti-theft system also needs an on-car relearn.

    No. Both control the engine, but a PCM also controls the transmission. This listing is an engine control module.

    Is this ecm the same as a PCM?

    Yes. The module is flashable and has to be properly flash programmed for the vehicle. A Ford with the passive anti-theft system also needs an on-car relearn.

    No. Both control the engine, but a PCM also controls the transmission. This listing is an engine control module.

    Frequently Asked Questions

    Is the A1 CARDONE 78-9033F ecm right for the 1999-2000 Ford Escort 4-cylinder 2.0L?

    Yes, the A1 CARDONE 78-9033F engine control module fits the 1999-2000 Ford Escort 4-cylinder 2.0L, and that car takes one.

    Yes. The A1 CARDONE 78-9033F fits the 1999-2000 Ford Escort 4-cylinder 2.0L, and that engine takes one module.

    Does the 78-9033F module come with mounting hardware?

    No. The listing includes the module and an instruction sheet, but mounting hardware is not included.

    It comes with an instruction sheet, but mounting hardware is not included. The package holds the module and the sheet.

    Does this remanufactured ecm come with an instruction sheet and mounting hardware?

    No. The listing includes the module and an instruction sheet, but mounting hardware is not included.

    It comes with an instruction sheet, but mounting hardware is not included. The package holds the module and the sheet.

    How many terminals does the connector on the 78-9033F module have?

    The A1 CARDONE 78-9033F has one rectangular female connector with 104 male pin terminals.

    The A1 CARDONE 78-9033F has 104 male pin terminals. It uses one rectangular female connector.

    How many pins does the A1 CARDONE 78-9033F ecm have?

    The A1 CARDONE 78-9033F has one rectangular female connector with 104 male pin terminals.

    The A1 CARDONE 78-9033F has 104 male pin terminals. It uses one rectangular female connector.

    What signs can mean a remanufactured ECM is failing?

    A check engine light that stays on after a reset, the engine shutting off for no reason or intermittent starting problems can mean the module is failing. A shop can run the tests to confirm.

    Not every Ford requires a PATS reset, but a vehicle with the Ford passive anti-theft system needs an on-car relearn. The PATS chart on the O.E. manufacturer's service site covers each application.

    Does a Ford engine control module need a PATS relearn after installation?

    A check engine light that stays on after a reset, the engine shutting off for no reason or intermittent starting problems can mean the module is failing. A shop can run the tests to confirm.

    Not every Ford requires a PATS reset, but a vehicle with the Ford passive anti-theft system needs an on-car relearn. The PATS chart on the O.E. manufacturer's service site covers each application.

    Does this remanufactured ECM need to be programmed after installation?

    Yes. The module is flashable and has to be properly flash programmed for the vehicle. A Ford with the passive anti-theft system also needs an on-car relearn.

    No. Both control the engine, but a PCM also controls the transmission. This listing is an engine control module.

    Is this ecm the same as a PCM?

    Yes. The module is flashable and has to be properly flash programmed for the vehicle. A Ford with the passive anti-theft system also needs an on-car relearn.

    No. Both control the engine, but a PCM also controls the transmission. This listing is an engine control module.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review