A1 CARDONE 79-3667V engine control module (ecm) for the 2002 Chrysler PT Cruiser 4-cylinder 2.4L is a remanufactured unit that controls the engine.
- Reverse engineering shows why the original unit failed, so engineers can correct its design weaknesses
- Critical components are re-soldered or replaced for solid electrical connections that help prevent intermittent failures
- Each unit is 100% computer tested, using automated equipment or a bench test depending on the application
- On-car vehicle validation checks durability and performance
- Remanufacturing cuts the energy and raw material needed to make a new part by 80%
Quick facts
- Part: A1 CARDONE 79-3667V engine control module (ecm)
- Fits: 2002 Chrysler PT Cruiser 4-cylinder 2.4L
- Condition: Remanufactured
A failing engine control module can show up as a check engine light that stays on after a reset, an engine that shuts off for no reason or intermittent starting trouble. Before replacing it, look over the connectors, grounds and wiring harness with the engine off for damage or corrosion. Poor grounds and power, a bad harness and shorted solenoids or relays are common causes of module failure.
Fits
This listing is one module for the 2002 Chrysler PT Cruiser 4-cylinder 2.4L, which takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Mounting holes: 5
- Length: 10.8 in
- Width: 8.9 in (226.06 mm)
- Height: 2.6 in
- Terminals: 80 male pin terminals
- Connectors: 2 female rectangle connectors
Build and materials
- Condition: Remanufactured
- Flashable: Yes
- Removable PROM: No
- Grade: Standard replacement
- Country of origin: Mexico
In the box
One engine control module and one instruction sheet. Mounting hardware is not included; plan on new fasteners, as the old ones may not be reusable.
Installation notes
- Chrysler models 1996 and newer need VIN programming.
- The module is flashable and must be properly flash programmed for the vehicle.
Interchange: 5033665AB · 5033665AC · 5033665AE
Frequently Asked Questions
Is this the powertrain control module for the 2002 Chrysler PT Cruiser 4-cylinder 2.4L?
Yes, A1 CARDONE 79-3667V fits that car. It is an engine control module; an ECM controls the engine, while a PCM also controls the transmission.
Yes, A1 CARDONE 79-3667V fits that car. It is an engine control module; an ECM controls the engine, while a PCM also controls the transmission.
Does the 79-3667V come with an instruction sheet or mounting bolts?
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
Does the 79-3667V come with an instruction sheet or mounting bolts?
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
Does a remanufactured ECM need VIN programming on a Chrysler?
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Does a remanufactured ECM need VIN programming on a Chrysler?
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Could loss of spark mean the engine control module has failed?
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
Could loss of spark mean the engine control module has failed?
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
How is this remanufactured A1 CARDONE ECM tested?
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
How is this remanufactured A1 CARDONE ECM tested?
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
Frequently Asked Questions
Is this the powertrain control module for the 2002 Chrysler PT Cruiser 4-cylinder 2.4L?
Yes, A1 CARDONE 79-3667V fits that car. It is an engine control module; an ECM controls the engine, while a PCM also controls the transmission.
Yes, A1 CARDONE 79-3667V fits that car. It is an engine control module; an ECM controls the engine, while a PCM also controls the transmission.
Does the 79-3667V come with an instruction sheet or mounting bolts?
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
Does the 79-3667V come with an instruction sheet or mounting bolts?
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
It comes with an instruction sheet. Mounting hardware is not included in the A1 CARDONE 79-3667V box, so plan on new fasteners.
Does a remanufactured ECM need VIN programming on a Chrysler?
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Does a remanufactured ECM need VIN programming on a Chrysler?
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Yes, Chrysler models 1996 and newer need VIN programming, and this A1 CARDONE 79-3667V module is flashable and must be properly flash programmed for the vehicle.
Could loss of spark mean the engine control module has failed?
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
Could loss of spark mean the engine control module has failed?
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
It can be a sign; loss of spark, loss of fuel injection and loss of pulse to the fuel pump can all come from a failed module. A shop can run the tests to confirm it.
How is this remanufactured A1 CARDONE ECM tested?
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
How is this remanufactured A1 CARDONE ECM tested?
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
Each unit is 100% computer tested, using automated equipment or a bench test depending on the application. On-car vehicle validation also checks durability and performance.
