Remanufactured Transfer Case Motor for 2004 Dodge Durango - A1 CARDONE 48-303

$291.99

Vehicles this part fits

    Part number: 48-303
    UPC: 082617641470
    Weight: 3.89 LBS
    Item Package Quantity: 1
    $291.99
    Adding to cart… The item has been added

    Have questions?

    CARDONE Reman Transfer Case Motor P/N:48-303
    CARDONE Reman Transfer Case Motor P/N:48-303
    $291.99
    $291.99

    A1 CARDONE 48-303 transfer case motor for the 2004 Dodge Durango is a remanufactured motor that shifts the transfer case. The A1 CARDONE transfer case motor drives gear engagement inside the 4WD system.

    • Reverse engineered to find why the original unit failed, with the design weaknesses corrected
    • 100% computer tested at three points during remanufacturing
    • 100% torque tested for the strength needed for proper gear engagement
    • Assembled with a measured amount of lubricant for quiet operation and long life
    • Motor magnets are 100% recharged
    • Motor sensors are 100% replaced with new sensors

    Quick facts

    • Part: A1 CARDONE 48-303 transfer case motor
    • Fits: 2004 Dodge Durango
    • Condition: Remanufactured

    A transfer case control module calibration issue or a front axle lock actuator that does not engage can also be behind a Service 4WD light, a 4WD that will not engage or a weak-sounding shift. Find the cause before buying; if the motor is at fault, this unit replaces it.

    Fits

    This is a direct-replacement unit for the 2004 Dodge Durango, which takes one.

    Specifications

    Fit and size

    • Quantity per vehicle: 1
    • Mounting holes: 3
    • Connector: 1 female, rectangle shape
    • Terminals: 7 female blade terminals
    • Sprocket teeth: 13

    Build and materials

    • Condition: Remanufactured
    • Shift operation: electronic
    • Drive type: gear
    • Country of origin: Mexico

    In the box

    One transfer case motor and one instruction sheet. Mounting hardware and a wiring harness are not included; plan on new bolts, as the old ones may not be reusable.

    Installation notes

    • Do not run the motor while it is off the transfer case; that can damage it and set an error code that must be cleared before it will work again.
    • Shift the transfer case into the two-wheel drive position at the shift shaft before installing; a crescent wrench can be used.
    • The replacement motor drive is factory-set in the 2 wheel drive position.

    Interchange: 5103309AA

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    5103309AA

    Frequently Asked Questions

    Is the 48-303 the right 2004 Dodge Durango transfer case motor?

    Yes. A1 CARDONE 48-303 is a direct-replacement transfer case motor for the 2004 Dodge Durango, which takes one.

    Yes. A1 CARDONE 48-303 is a direct-replacement transfer case motor for the 2004 Dodge Durango, which takes one.

    Does the A1 CARDONE 48-303 come with bolts or a wiring harness?

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    Does the A1 CARDONE 48-303 come with bolts or a wiring harness?

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    Can I install the replacement transfer case motor if my old one failed in 4 Wheel Drive Low or High?

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Can I install the replacement transfer case motor if my old one failed in 4 Wheel Drive Low or High?

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Can I test this transfer case motor on the bench before installing it?

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    Can I test this transfer case motor on the bench before installing it?

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    How many terminals does the connector on this transfer case motor have?

    The motor has one female rectangular connector with seven female blade terminals.

    The motor has one female rectangular connector with seven female blade terminals.

    How many terminals does the connector on this transfer case motor have?

    The motor has one female rectangular connector with seven female blade terminals.

    The motor has one female rectangular connector with seven female blade terminals.

    Frequently Asked Questions

    Is the 48-303 the right 2004 Dodge Durango transfer case motor?

    Yes. A1 CARDONE 48-303 is a direct-replacement transfer case motor for the 2004 Dodge Durango, which takes one.

    Yes. A1 CARDONE 48-303 is a direct-replacement transfer case motor for the 2004 Dodge Durango, which takes one.

    Does the A1 CARDONE 48-303 come with bolts or a wiring harness?

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    Does the A1 CARDONE 48-303 come with bolts or a wiring harness?

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    No. The A1 CARDONE 48-303 box holds the transfer case motor and an instruction sheet. Mounting hardware and a wiring harness are not included.

    Can I install the replacement transfer case motor if my old one failed in 4 Wheel Drive Low or High?

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Can I install the replacement transfer case motor if my old one failed in 4 Wheel Drive Low or High?

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Yes. First shift the transfer case by hand into the two-wheel drive position at the shift shaft; a crescent wrench can be used. The replacement motor drive is factory-set in 2 wheel drive.

    Can I test this transfer case motor on the bench before installing it?

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    Can I test this transfer case motor on the bench before installing it?

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    No. Do not operate the motor while it is off the transfer case. That can damage it and set an error code that must be cleared before it will operate again.

    How many terminals does the connector on this transfer case motor have?

    The motor has one female rectangular connector with seven female blade terminals.

    The motor has one female rectangular connector with seven female blade terminals.

    How many terminals does the connector on this transfer case motor have?

    The motor has one female rectangular connector with seven female blade terminals.

    The motor has one female rectangular connector with seven female blade terminals.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review