Carlson Disc Brake Caliper Piston P/N:7768

Be the first to review this product
$17.99
MPN: 7768
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Carlson Disc Brake Caliper Piston P/N:7768
Carlson Disc Brake Caliper Piston P/N:7768
$17.99

Service a sticking or worn front caliper with the Carlson Brake Caliper Piston 7768. This is the component that turns hydraulic brake pressure into the force that presses the pad against the rotor. It is listed for many models from one make, among them the 1994-1998 Audi Cabriolet, 1995-1997 Audi S6 and 1993-1995 Audi 90.

Inside the caliper, this disc brake caliper piston moves outward in its bore each time the brake pedal is pressed, then eases back slightly on release. If the original piston is pitted, corroded or binding, replacing it is one step in servicing the caliper.

  • Position: front
  • Part number: Carlson 7768
  • Quantity per application: varies. Most listed applications use 2, while the 1993-1995 Audi 90 lists 4.
  • Engine: All, for the listed applications

Signs a caliper piston may need attention include:

  • brake drag
  • the vehicle pulling to one side under braking
  • uneven pad wear
  • one wheel running hotter than the others

These symptoms can have other causes, so diagnose the problem before replacing parts. Follow the vehicle service information for caliper disassembly, reassembly and brake bleeding. See the Buyer's Guide tab for the full list of applications.

Frequently Asked Questions

What does a brake caliper piston do?

When you press the brake pedal, hydraulic pressure pushes the piston outward in the caliper bore, which forces the brake pad against the rotor. Carlson 7768 is a front caliper piston.

Which vehicles is the Carlson 7768 listed for?

It is listed for many Audi models, among them the 1994-1998 Audi Cabriolet, 1995-1997 Audi S6 and 1993-1995 Audi 90. See the Buyer's Guide tab for the full list.

How many caliper pistons does my vehicle use?

The quantity per application varies. Most listed applications use 2, while the 1993-1995 Audi 90 lists 4. Check the Buyer's Guide tab for your vehicle.

What are signs a caliper piston may need replacing?

Signs include a piston that sticks or binds, brake drag, pulling to one side, uneven pad wear, or pitting and corrosion on the piston surface. Diagnose the cause before replacing parts.

What does installing a caliper piston involve?

You remove and disassemble the caliper, fit the new piston, then reassemble the caliper and bleed the brakes. Follow the vehicle service information for the procedure and any seals or boots it calls for.