Keep brake fluid moving to the rear right wheel with the Centric Parts brake hydraulic hose 150.40387, a direct-fit replacement for the listed applications on the 2008-2012 Honda Accord and 2009-2014 Acura TSX. See the "Vehicles it fits" section for engine and trim details.
A brake hydraulic hose is the flexible link between the vehicle's rigid brake lines and the brake at the wheel. It carries pressurized brake fluid and flexes as the suspension moves. Over time a hose can crack, swell or leak, so it is a common item to inspect and replace during brake service.
- Position: Rear right.
- Application coverage: Centric says its brake hose line offers the widest application coverage in the aftermarket.
- Replacement quality: Centric presents its hoses as top-quality aftermarket replacements.
- Part of a broader hydraulic program: Centric calls its brake hydraulic lineup the most complete and up-to-date in the industry. Alongside brake hoses, it covers master and wheel cylinders plus caliper and wheel cylinder repair kits.
A brake hose may need replacing if you notice a soft or spongy pedal, visible cracks or bulging, or brake fluid seeping at the fittings. Other brake faults can cause similar symptoms, so diagnose the cause first. If a failing hose is the problem, this part replaces it. Bleed the brake system after installation. Check the vehicle service information for the correct fasteners and any sealing washers, and for whether the originals may be reused.
Interchange: H621120 · 01466TA0A00 · BH382720 · BH144202
This part cross-references / interchanges with the following part numbers:
150.40387, H621120, 01466TA0A00, BH382720, BH144202
Frequently Asked Questions
What does this brake hydraulic hose do?
It is the flexible connection between the rigid brake line and the brake at the rear right wheel. It carries pressurized brake fluid and allows for suspension movement.
Which wheel position is this brake hose for?
It is cataloged for the rear right position on the listed applications.
Does this brake hose fit the 2008-2012 Honda Accord and 2009-2014 Acura TSX?
Yes. It is listed as a direct-fit replacement for the rear right position on the 2008-2012 Honda Accord and the 2009-2014 Acura TSX. The "Vehicles it fits" section shows trim-level details.
What are signs a brake hose may need replacing?
A soft or spongy pedal, cracks or bulges in the hose, or fluid leaking near the fittings may indicate a worn hose. Other brake faults cause similar symptoms, so inspect the system before replacing parts.
Do I need to bleed the brakes after installing this hose?
Yes. Opening the hydraulic system lets air in, so bleed the brakes according to the vehicle service procedure once the new hose is installed.
