Cloyes VCB118 engine variable valve timing (vvt) sprocket bolt for the 2013-2022 Ram 1500 V6 3.6L and other vehicles secures the VVT sprocket. It gives technicians a repair fastener for higher-mileage vehicles.
- Fastener designed specifically for VVT sprockets
- Steel bolt made from high-strength material for the torque and clamping loads on the sprocket
- Every bolt is production-tested for torque retention and load clamping, which reduces the risk of loosening
- Meets bolt specifications to match the installation instructions
Quick facts
- Part: Cloyes VCB118 engine variable valve timing (vvt) sprocket bolt
- Fits: 2013-2022 Ram 1500 V6 3.6L and other vehicles
- Material: Steel
- Condition: New
A rattle from the front of the engine, a check engine light with a cam-timing code or rough running can mean a sprocket bolt is worn, though a VVT solenoid or the timing chain can be behind the same signs, so find the cause before replacing the bolt.
Fits
A wide range of Chrysler, Dodge, Jeep and Ram models is listed for this bolt, headed by the 2013-2022 Ram 1500 V6 3.6L, the 2012-2017 Jeep Wrangler V6 3.6L and the 2011-2015 Jeep Grand Cherokee V6 3.6L. Most applications take four bolts per vehicle, while the 2021-2022 Ram 1500 V6 3.6L takes one. If your vehicle isn't named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Thread size: M18 - 1.5
- Thread diameter: 17.81 mm (0.701 in)
- Thread pitch: 1.5 mm
- Quantity per vehicle: varies by application
Build and materials
- Material: Steel
- Thread type: metric, fine
- Thread direction: right-hand (clockwise)
- Condition: New
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is the Cloyes VCB118 bolt right for a 2013-2022 Ram 1500 V6 3.6L?
Yes, Cloyes VCB118 is listed for the 2013-2022 Ram 1500 V6 3.6L, and the 2012-2017 Jeep Wrangler V6 3.6L and 2011-2015 Jeep Grand Cherokee V6 3.6L also take it. Other years and engines are in the "Vehicles it fits" section.
What thread does this VVT sprocket bolt have?
This bolt has an M18 - 1.5 thread with a 17.81 mm (0.701 in) thread diameter and a 1.5 mm pitch. It is a right-hand (clockwise) fine metric thread.
Is the Cloyes VCB118 sprocket bolt made of steel?
Yes. Cloyes VCB118 is a steel bolt made from high-strength material to handle the torque and clamping loads of a VVT sprocket.
Are these VVT sprocket bolts production-tested?
Yes. Every Cloyes VCB118 bolt is production-tested for torque retention and load clamping, which reduces the risk of loosening.
Can I keep driving with a loose VVT sprocket bolt?
No. A loose or damaged sprocket bolt should be checked and replaced promptly. A shop can inspect the timing components and test the VVT system.
