TrakMotive FD-8256 front left CV axle shaft for the 2013-2019 Ford Escape carries drive torque from the transmission to the wheel. The TrakMotive CV axle flexes with suspension travel and steering angle so drive keeps reaching the wheel.
- Neoprene boots on both the inboard and outboard joints
- Male inboard joint with 35 splines
- Conventional outboard joint with 27 splines
- Self-locking axle nut included, M22x1.5 thread with a 32 mm hex
Quick facts
- Part: TrakMotive FD-8256 CV axle shaft
- Fits: 2013-2019 Ford Escape
- Position: Front left
- Condition: New
A clicking or popping noise on turns, vibration under power, or grease thrown from a torn boot can mean a worn axle joint. Before replacing the axle, look over both boots and joints with the engine off and cool, since these signs can also come from other parts, and a shop can test anything beyond that.
Fits
This shaft fits the 2013-2019 Ford Escape, which takes one on the front left. This listing is that single shaft; the front right is a separate part, and both sides are normally replaced together.
Specifications
Fit and size
- Position: Front left
- Quantity per vehicle: 1
- Overall compressed length: 695 mm (27.36 in)
- Inboard splines: 35
- Outboard splines: 27
- Axle nut thread size: M22x1.5
- Axle nut hex size: 32 mm (1.25 in)
Build and materials
- Inboard joint type: Male
- Outboard joint type: Conventional
- Boot material: Neoprene (inboard and outboard)
- Axle nut: Included, self-locking
- ABS tone ring: not included
- Condition: New
- Warranty: TrakMotive limited lifetime warranty
- Country of origin: China
In the box
One CV axle shaft and its self-locking axle nut.
Interchange: 60-2284 · FD-8-8704
169256 · NCV11166 · 40718022 · CV6Z3B437B · CV6Z3B437N
This part cross-references / interchanges with the following part numbers:
169256, 60-2284, NCV11166, 40718022, FD-8-8704, CV6Z3B437B, CV6Z3B437N, FD-8256
Frequently Asked Questions
Does the TrakMotive FD-8256 fit the 2013-2019 Ford Escape?
Yes. TrakMotive FD-8256 is a front left CV axle shaft for the 2013-2019 Ford Escape. The front right side is a separate part.
Does the TrakMotive CV axle shaft come with an axle nut?
Yes. TrakMotive FD-8256 includes a self-locking axle nut with an M22x1.5 thread and a 32 mm hex. The ABS tone ring is not included.
How long is this CV axle shaft?
This axle shaft measures 695 mm (27.36 in) overall compressed length, with 35 splines at the inboard end and 27 at the outboard end.
Why does my car click when turning with a bad CV axle?
A clicking or popping noise on turns, vibration, or grease flung from a torn boot can be signs of a worn CV joint, though they can have other causes. A shop can confirm it.
What are the boots on this CV axle made of?
Both the inboard and outboard joint boots on this axle shaft are neoprene.
