Dayco 89095 accessory drive belt idler pulley for the 1999-2009 Saab 9-5 and other vehicles guides the drive belt along its path on the engine. This Dayco accessory drive belt idler pulley is a grooved pulley in the main drive; it carries the belt and does not power an accessory.
- Grooved pulley face for belts up to 6 ribs wide
- Single bearing with a 17 mm inner diameter
- Bearing width of 12 mm
- Main drive position on the accessory belt drive
Quick facts
- Part: Dayco 89095 accessory drive belt idler pulley
- Fits: 1999-2009 Saab 9-5 and other vehicles
- Position: Main drive, grooved pulley
- Condition: New
A worn idler pulley can show up as a squeal, chirp or grinding from the belt area, a wobbling pulley, or uneven belt wear. These signs alone do not prove the pulley is the problem, since a worn belt can make similar noise. One pulley goes on each engine, and this listing is one pulley.
Fits
This accessory drive belt idler pulley also fits the 2007-2008 Dodge Sprinter 2500 V6 3.5L and the 2007-2008 Dodge Sprinter 3500 V6 3.5L.
Specifications
Fit and size
- Position: Main drive, grooved pulley
- Quantity per vehicle: 1
- Max belt width: 6 ribs
- Bearing inner diameter: 17 mm
- Bearing width: 12 mm
Build and materials
- Pulley face: grooved, not flat
- Number of bearings: 1
- Condition: New
Interchange: 36079 · 36240 · 36512 · ALT03322 · 580033 · 580061 · 580247 · 49098 · 900337A · 900540A · 900586A · 951656A · 900337 · 900540 · 900586
This part cross-references / interchanges with the following part numbers:
36079, 36240, 36512, ALT03322, 580033, 580061, 580247, 49098, 900337A, 900540A, 900586A, 951656A, 900337, 900540, 900586, 68023936AA, 68029414AA, 68029414AB, F43E-19A216-BA, F5RZ-6C348-A, 32101332, 4967907, 4968590
Frequently Asked Questions
Does this accessory drive belt idler pulley fit the 1999-2009 Saab 9-5?
Yes. Dayco 89095 is listed for the 1999-2009 Saab 9-5, with the L4-2.3L engine for 1999-2003. If your car is not named on this page, look it up in the "Vehicles it fits" section.
What belt width does the Dayco 89095 accessory drive belt idler pulley take?
Dayco 89095 takes a belt up to 6 ribs wide. Its face is grooved rather than flat, matching the main drive position.
What size is the bearing in this accessory drive belt idler pulley?
This accessory drive belt idler pulley has one bearing with a 17 mm inner diameter and a width of 12 mm.
How can I tell if the bearing in this accessory drive belt idler pulley is wearing out?
With the engine off and cool, look for a wobbling pulley or rough, loose play. A squeal, chirp or grinding from the belt area can also be a sign, and a shop can test it.
Is 36079 the same as this Dayco 89095 accessory drive belt idler pulley?
Yes. 36079 is one of the numbers Dayco 89095 replaces, and it is printed on the Interchange line with the other cross-reference numbers.
