PowerBond by Dayco PB1463N harmonic balancer for the 1996-2001 Ford Explorer V8 5.0L and other vehicles dampens crankshaft vibration and drives the serpentine belt.
- Ring-weighted counterweight balance
- Outer ring made of cast iron
- One integrated serpentine pulley, 146 mm (5.749 in) outside diameter
- Crank trigger/exciter plate built into the balancer
- Timing marks on the balancer
Quick facts
- Part: PowerBond by Dayco PB1463N harmonic balancer
- Also called: engine harmonic balancer
- Fits: 1996-2001 Ford Explorer V8 5.0L and other vehicles
- Material: Cast iron outer ring
- Condition: New
A wobbling pulley, a belt that slips, or vibration from the engine can mean the balancer is worn or damaged. A worn serpentine belt, a weak belt tensioner or a failing accessory pulley bearing can be behind some of the same signs, so find the cause before you buy.
Fits
This balancer fits the 1996-2001 Ford Explorer V8 5.0L and the 1997-2001 Mercury Mountaineer.
Specifications
Fit and size
- Quantity per vehicle: 1
- Overall outside diameter: 161.95 mm (6.376 in)
- Pulley outside diameter: 146 mm (5.749 in)
- Crank bore: 34.89 mm (1.374 in)
- Nose outside diameter: 47.65 mm (1.876 in)
- Overall width: 113.50 mm (4.469 in)
- Ring width: 37.49 mm (1.476 in)
- Bolt holes: 3
Build and materials
- Outer ring material: cast iron
- Counterweight balance: ring weighted
- Integrated pulleys: 1, serpentine
- Crank trigger/exciter plate: yes
- Timing marks: yes
- Condition: New
In the box
One harmonic balancer. This listing holds one, and each vehicle takes one. The Woodruff key, mounting hardware and installation instructions are not included, so plan on new bolts, since the old ones may not be reusable.
Interchange: 594-155 · DA-3024
102140 · 6005318
This part cross-references / interchanges with the following part numbers:
102140, 594-155, 6005318, DA-3024
Frequently Asked Questions
Is the PB1463N a harmonic balancer for the 1996-2001 Ford Explorer V8 5.0L?
Yes. PowerBond by Dayco PB1463N fits the 1996-2001 Ford Explorer V8 5.0L and the 1997-2001 Mercury Mountaineer.
Does the PB1463N come with bolts or a Woodruff key?
No. This harmonic balancer is sold without mounting hardware, a Woodruff key or installation instructions, so those need to be bought separately.
What is the crank bore on this engine harmonic balancer?
The PowerBond by Dayco PB1463N has a 34.89 mm (1.374 in) crank bore and a 47.65 mm (1.876 in) nose outside diameter.
How can I tell if a harmonic balancer is wearing out?
Cracks, a wobbling pulley or damaged timing marks can point to a worn balancer. A shop can test it to confirm.
Is 594-155 the same as the PB1463N?
Yes. 594-155 is one of the other numbers this PowerBond by Dayco balancer replaces, along with DA-3024, 102140 and 6005318.
