Delphi FE0030 electric fuel pump for the 1994-2000 Mercedes-Benz E320 6-cylinder 3.2L or V6 3.2L and other vehicles carries fuel from the tank to the engine. This Delphi electric fuel pump is an in-line unit that pushes fuel through the fuel system under pressure.
- Designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw, so less load on the vehicle's electrical system
- Designed to restore fast pressure performance and system integrity with less energy
- Validated, tested and matched to its vehicle application
Quick facts
- Part: Delphi FE0030 electric fuel pump
- Fits: 1994-2000 Mercedes-Benz E320 6-cylinder 3.2L or V6 3.2L and other vehicles
- Position: In-line
- Condition: New
Hard starting, stalling or a loss of power under load can mean the pump is weak. A clogged fuel strainer, a bad relay or fuse, or a wiring fault can also be behind them, so track down the cause before you buy a pump.
Fits
It is listed for a wide range of Mercedes-Benz models, including the 1994-1999 Mercedes-Benz S320 6-cylinder 3.2L and the 1994-1999 Mercedes-Benz S420 V8 4.2L. For any other Mercedes-Benz, search its year, model and engine in the "Vehicles it fits" section. One pump is needed per car.
Specifications
- Position: In-line
- Quantity per vehicle: 1
- Condition: New
In the box
One electric fuel pump, three extra fittings, an insulating sleeve, two nuts and washers, terminal hardware and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the pump.
- Replace the fuel strainer whenever you replace the fuel pump.
- An instruction sheet comes with the pump.
Product information is for general reference and may contain errors. See our Disclaimer.
Frequently Asked Questions
Is this the Mercedes-Benz E320 electric fuel pump for a 1994-2000 E320 6-cylinder 3.2L or V6 3.2L?
Yes. Delphi FE0030 is listed for the 1994-2000 Mercedes-Benz E320 6-cylinder 3.2L or V6 3.2L, and that car takes one pump.
What fittings and hardware come with the Delphi FE0030?
Delphi FE0030 comes with three extra fittings, an insulating sleeve, two nuts and washers, terminal hardware and an instruction sheet, along with the pump itself.
Does this Delphi inline fuel pump draw less current?
Yes. It is built for a lower amperage draw, so it puts less load on the vehicle's electrical system.
What should I do alongside installing this fuel pump?
Check and clean the fuel tank first, and replace the fuel strainer at the same time. The instruction sheet in the box covers the installation steps.
How is the Delphi FE0030 tested before it is sold?
The pump is validated, tested and matched to its vehicle application. Delphi builds its fuel pumps to its OE standards.
