Electric Fuel Pump for 1985-1992 Chevrolet Camaro & More - Delphi FE0110

Be the first to review this product
$80.99
WARNING:California Proposition 65▾
MPN: FE0110
UPC: 689604033784
Item Package Quantity: 1
Adding to cart… The item has been added

Have questions?

Delphi Electric Fuel Pump P/N:FE0110
Delphi Electric Fuel Pump P/N:FE0110
$80.99

Delphi FE0110 electric fuel pump for the 1985-1992 Chevrolet Camaro V8 5.0L, the 1987-1992 Camaro V8 5.7L, the 1990-1992 Camaro V6 3.1L and other vehicles moves fuel from the tank to the engine. This Delphi electric fuel pump mounts inside the fuel tank.

  • Designed to operate under extreme temperatures with quick engine starts
  • Improved pump performance from the pump's design and durability
  • Fast pressure performance and system integrity with less energy use
  • Validated and tested for the vehicle it is matched to
  • Lower amperage draw puts less load on the vehicle's electrical system

Quick facts

  • Part: Delphi FE0110 electric fuel pump
  • Fits: the 1985-1992 Chevrolet Camaro V8 5.0L, the 1987-1992 Camaro V8 5.7L, the 1990-1992 Camaro V6 3.1L and other vehicles
  • Position: In-tank
  • Condition: New

Hard starting, stalling or a whine from the tank can mean the pump is weakening. If it is the cause, this one replaces it. A blown fuse or damaged connector can also starve the engine of fuel, so with the engine off, look those over first and leave fuel pressure testing to a shop. Each vehicle takes one pump, in the tank.

Fits

The vehicles it fits include the 1988 Pontiac Grand Prix V6 2.8L, the 1989-1990 Grand Prix V6 3.1L and the 1996 Buick Regal V6 3.8L. If your car isn't named here, enter its year and engine on the Buyer's Guide tab to see whether it fits.

Specifications

  • Position: In-tank
  • Quantity per vehicle: 1
  • Condition: New

In the box

One electric fuel pump, one grommet, one insulating sleeve, one isolator, one pump retainer, two seals, one torque limiting isolator and one instruction sheet.

Installation notes

  • Check and clean the fuel tank before the new pump goes in.
  • Replace the fuel strainer whenever a fuel pump is repaired.
  • See the instruction sheet in the box for the steps.

Frequently Asked Questions

Does the Delphi FE0110 fit the 1996 Buick Regal V6 3.8L?

Yes. The Delphi FE0110 is listed for the 1996 Buick Regal V6 3.8L, and that car takes one in-tank pump.

Does the Delphi FE0110 come with a grommet and seals?

Yes. The Delphi FE0110 comes with a grommet, insulating sleeve, isolator, pump retainer, two seals, a torque limiting isolator and an instruction sheet.

How much load does this fuel pump put on the electrical system?

This pump draws lower amperage, so it puts less load on the vehicle's electrical system.

What else should be done when swapping in this in-tank pump?

Check and clean the fuel tank, and replace the fuel strainer in the same job. See the included instruction sheet for the steps.

Can this pump handle extreme temperatures?

Yes. This pump is designed to run in extreme temperatures and to start the engine quickly.