Delphi FE0112 electric fuel pump for the 1993-1998 Chevrolet B7 V8 6.0L and other vehicles sits inside the fuel tank and sends fuel to the engine. Delphi builds all its fuel pumps to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Pump design aimed at fast pressure performance and system integrity with less energy
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested pump
Quick facts
- Part: Delphi FE0112 electric fuel pump
- Fits: 1993-1998 Chevrolet B7 V8 6.0L and other vehicles
- Position: In-tank
- Condition: New
Hard starting, sputtering under load or a whine from the tank can mean the pump is wearing out, though a clogged fuel strainer or a faulty fuel pump relay can be behind the same signs, so find the cause before you replace anything.
Fits
The 1993-1998 Chevrolet B7 V8 6.0L, the 1993-1998 GMC B7 V8 6.0L and the 1997-1998 Chevrolet C6500 Kodiak V8 6.0L all take this pump, and more vehicles do as well. The 1997-1998 Chevrolet C6500 Kodiak V8 6.0L takes one pump, and so do the other two. If your vehicle is not named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
Fit and size
- Position: In-tank
- Quantity per vehicle: 1
Build and materials
- Type: electric fuel pump
- Condition: New
In the box
One electric fuel pump, two hose clamps, one hose piece, one insulating sleeve, one isolator, two seals and one instruction sheet.
Installation notes
- Check and clean the fuel tank before the new pump goes in.
- Replace the fuel strainer whenever a fuel pump is repaired.
- The instruction sheet in the box covers the steps.
Frequently Asked Questions
Does the Delphi FE0112 fit the 1993-1998 GMC B7 V8 6.0L?
Yes. Delphi FE0112 fits the 1993-1998 GMC B7 V8 6.0L, and it takes one pump. For another vehicle, look up its year and engine in the "Vehicles it fits" section.
Do the hose clamps and seals come with the Delphi FE0112?
Yes. The box holds the pump, two hose clamps, a hose piece, an insulating sleeve, an isolator, two seals and an instruction sheet.
Is this Delphi electric fuel pump an in-tank pump?
Yes. Delphi FE0112 is an in-tank electric fuel pump, so it mounts inside the fuel tank.
How can I tell if this in-tank fuel pump is going bad?
Hard starting, sputtering under load or a whine from the tank are signs a pump may be wearing out. Fuel pressure testing needs the engine running, so a shop can test it.
Should the fuel strainer be replaced along with the Delphi FE0112?
Yes. When a pump is changed, a new fuel strainer goes in with it, and the fuel tank is checked and cleaned first.
