Delphi FE0154 electric fuel pump for the 1985-1988 Ford Thunderbird 4-cylinder 2.3L, the 1986-1988 Thunderbird V8 5.0L, the 1986-1997 Thunderbird V6 3.8L, the 1991-1993 Thunderbird V8 5.0L, the 1994-1997 Thunderbird V8 4.6L and other vehicles delivers fuel from the tank to the engine. This in-tank Delphi electric fuel pump is built to Delphi's OE standards.
- Designed to operate under extreme temperatures with quick engine starts
- Lower amperage draw puts less load on the vehicle's electrical system
- Helps restore fast pressure performance and system integrity while using less energy
- Validated and tested, then matched to the right application
Quick facts
- Part: Delphi FE0154 electric fuel pump
- Fits: 1985-1988 Ford Thunderbird 4-cylinder 2.3L, the 1986-1988 Thunderbird V8 5.0L, the 1986-1997 Thunderbird V6 3.8L, the 1991-1993 Thunderbird V8 5.0L, the 1994-1997 Thunderbird V8 4.6L and other vehicles
- Position: In-tank
- Condition: New
A weak pump can show up as hard starting, stalling or sputtering under load, or a whine from the tank. A clogged fuel filter, a faulty fuel pump relay or damaged wiring can be behind those symptoms too, so track down the cause before buying a pump.
Fits
It also fits the 1986-1997 Mercury Cougar V6 3.8L and the 1995-1997 Ford Windstar V6 3.0L or 3.8L, with one pump per vehicle. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: In-tank
- Quantity per vehicle: 1
Build and materials
- Type: Electric
- Condition: New
In the box
One electric fuel pump, two blade terminal splices, two hose clamps, a hose piece, an insulating sleeve, an isolator grommet, two retaining clips, three seals, a sleeve isolator and an instruction sheet.
Installation notes
- An instruction sheet comes with the pump.
- Check and clean the fuel tank as part of the job.
- Replace the fuel strainer whenever the fuel pump is replaced.
Frequently Asked Questions
Does the Delphi FE0154 fit the 1994-1997 Ford Thunderbird V8 4.6L?
Yes. Delphi FE0154 is listed for the 1994-1997 Ford Thunderbird V8 4.6L, and that car takes one pump. For other models and engines, open the "Vehicles it fits" section.
Does the Delphi FE0154 come with hose clamps and seals?
Yes. Delphi FE0154 comes with two hose clamps, three seals, two retaining clips, two blade terminal splices, a hose piece, an insulating sleeve, an isolator grommet, a sleeve isolator and an instruction sheet.
Does this Delphi pump put less load on the car's electrical system?
Yes. Its lower amperage draw puts less load on the vehicle's electrical system, and the pump is designed to operate under extreme temperatures with quick engine starts.
What can a weak in-tank fuel pump feel like while driving?
Hard starting, stalling or sputtering under load, and a whine from the tank can all go with a weak pump. A shop can test fuel pressure to find out what is behind them.
Should I replace the fuel strainer when installing this fuel pump?
Yes. The strainer should be replaced whenever the fuel pump is replaced, and the fuel tank should be checked and cleaned as part of the same job.
