Delphi HP10203 fuel pump hanger for the 1990-1993 Honda Accord 4-cylinder 2.2L supports the fuel pump inside the tank and carries fuel out through its metal tubes.
- Metal tubes routed so they never touch the tank at any point, which avoids noise and vibration during vehicle operation
- Intended to restore fast pressure performance and system integrity while using less energy
- Lower amperage draw puts less load on the vehicle's electrical system
- Each part is validated and tested
Quick facts
- Part: Delphi HP10203 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1990-1993 Honda Accord 4-cylinder 2.2L
- Condition: New
Hard starting, stalling or an erratic fuel gauge can come from the fuel delivery side, though other parts can cause them too. With the engine off, look at the fuses and relay first, and leave pressure testing to a shop. If a worn fuel pump hanger assembly is the cause, this part replaces it.
Fits
This fuel pump hanger fits the 1990-1993 Honda Accord 4-cylinder 2.2L, and each car takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engine: L4-2.2L
Build and materials
- Condition: New
- Tubes: metal
In the box
One fuel pump hanger without a float arm, and one instruction sheet.
Installation notes
- Check and clean the fuel tank when fitting the fuel pump hanger.
- The instruction sheet in the box covers the steps.
Interchange: 950-0185 · 951-0010 · 17040-SM4-A30 · 17708-SM4-A32
4010014 · E8023 · E8322H · DHP10203 · 67830 · 69407 · 69624 · P72090 · P72227 · AFS0327P · RE0327P · A25549 · E16024 · A30194 · SP1129 · SP8322H · USEP8322H
This part cross-references / interchanges with the following part numbers:
4010014, E8023, E8322H, DHP10203, 67830, 69407, 69624, P72090, P72227, 950-0185, 951-0010, AFS0327P, RE0327P, 17040-SM4-A30, 17708-SM4-A32, A25549, E16024, A30194, SP1129, SP8322H, USEP8322H
Frequently Asked Questions
Does the Delphi HP10203 fuel pump hanger fit the 1990-1993 Honda Accord 4-cylinder 2.2L?
Yes. Delphi HP10203 fits the 1990-1993 Honda Accord 4-cylinder 2.2L (L4-2.2L), and the car takes one.
Does this Delphi fuel pump hanger come with a float arm?
No. Delphi HP10203 comes without a float arm; the box holds the fuel pump hanger and an instruction sheet.
Is this fuel pump hanger a low-amperage design?
Yes. This fuel pump hanger draws lower amperage, which puts less load on the vehicle's electrical system.
What should I do with the fuel tank when installing this fuel pump hanger?
Check the fuel tank and clean it as part of the install. The instruction sheet that comes with the part covers the installation steps.
How are the metal tubes on this fuel pump hanger routed?
Metal tubes in this fuel pump hanger are routed so they do not touch the tank at any point, which avoids noise and vibration while the vehicle is running.
