Delphi HP10215 fuel pump hanger for the 1990-1995 Ford Taurus V6 3.0L and the 1993-1995 Taurus V6 3.2L mounts in the fuel tank and carries the float arm for the gas gauge. This fuel pump hanger assembly is sold with its float arm.
- Metal tubes routed so they never touch the tank, which removes noise and vibration while driving
- Empty float height and float retention set for a correct gas gauge reading
- Validated, tested and matched to the right vehicle application
Quick facts
- Part: Delphi HP10215 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1990-1995 Ford Taurus V6 3.0L and the 1993-1995 Taurus V6 3.2L
- Condition: New
A gauge that reads wrong or a car that struggles to get fuel can mean this hanger needs replacing, but a blown fuse or a gauge fault can look the same. With the engine off, look at the fuel pump fuse first, and leave any test that needs the engine running to a shop.
Fits
This hanger fits the 1990-1995 Ford Taurus V6 3.0L and the 1993-1995 Ford Taurus V6 3.2L. The tank holds one hanger, so one is all you order.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump hanger with float arm, one seal, two retainer clips and one instruction sheet.
Installation notes
- An instruction sheet comes with the part for the steps.
- Check and clean the fuel tank before installing.
Interchange: 950-3003 · 951-0016 · 953-4147 · F3DZ 9H307-D · F3DZ 9H307-DA · PFS-180
4011139 · 4017266 · E2001 · E2115S · DHP10215 · 69044 · 69101 · 69117 · P74117 · P74686S · A30260 · SP1142 · SP2087H · USEP2115S
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4011139, 4017266, E2001, E2115S, DHP10215, 69044, 69101, 69117, P74117, P74686S, 950-3003, 951-0016, 953-4147, F3DZ 9H307-D, F3DZ 9H307-DA, PFS-180, A30260, SP1142, SP2087H, USEP2115S
Frequently Asked Questions
Does Delphi HP10215 fit a 1993-1995 Ford Taurus with the V6 3.2L?
Yes. Delphi HP10215 fuel pump hanger fits the 1993-1995 Ford Taurus V6 3.2L and also the 1990-1995 Taurus V6 3.0L.
Does the Delphi HP10215 hanger come with the float arm and a seal?
Yes. Delphi HP10215 comes with the float arm, one seal, two retainer clips and an instruction sheet.
Will the metal tubes on this fuel pump hanger rattle against the tank?
No. The metal tubes on this hanger are routed so they do not touch the tank at any point, which removes noise and vibration during driving.
Is the float on this hanger set up for a correct gas gauge reading?
Yes. The empty float height and float retention on this hanger match OE specifications, which gives a correct gas gauge reading.
Do I need to clean the fuel tank when installing this hanger?
Yes. Check and clean the fuel tank before installing, and use the instruction sheet in the box for the steps.
