Delphi HP10283 fuel pump hanger for the 1996-1997 Honda Accord 4-cylinder 2.2L holds the fuel pump inside the tank and carries fuel out toward the engine. This fuel pump hanger assembly arrives with its pump and a tank seal.
- Metal tubes routed so they never touch the tank, which removes noise and vibration while driving
- Pump designed to operate under extreme temperatures with quick engine starts
- Empty float height and float retention set for correct gas gauge readings
- Lower amperage draw puts less load on the vehicle's electrical system
- Part is validated and tested
Quick facts
- Part: Delphi HP10283 fuel pump hanger
- Also called: fuel pump hanger assembly
- Fits: 1996-1997 Honda Accord 4-cylinder 2.2L
- Condition: New
Hard starting, stalling or an inaccurate gas gauge can be linked to a worn hanger; a blown fuse, damaged wiring or another fuel-system fault may produce those symptoms too. Before replacing it, look at the fuse and the wiring you can reach with the engine off, and leave fuel pressure testing to a shop.
Fits
It fits the 1996-1997 Honda Accord 4-cylinder 2.2L, which takes one.
Specifications
Fit and size
- Quantity per vehicle: 1
- Engine: L4-2.2L
Build and materials
- Condition: New
- Pump: included (hanging pump)
In the box
One hanging pump, one tank seal and one instruction sheet.
Installation notes
- An instruction sheet comes with the part for the installation steps.
- Check and clean the fuel tank before installing the hanger.
Interchange: 951-0004 · 17040-SV1-L01 · 17040-SV1-L02
4010065 · E8229 · CHP10283 · 67841 · P72192 · E16009 · SP1118 · SP8349H
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4010065, E8229, CHP10283, 67841, P72192, 951-0004, 17040-SV1-L01, 17040-SV1-L02, E16009, SP1118, SP8349H
Frequently Asked Questions
Is the Delphi HP10283 fuel pump hanger right for the 1996-1997 Honda Accord 4-cylinder 2.2L?
Yes. Delphi HP10283 is listed for the 1996-1997 Honda Accord 4-cylinder 2.2L, and that car takes one.
Does the HP10283 hanger come with a tank seal?
Yes. This fuel pump hanger comes with its hanging pump, a tank seal and an instruction sheet.
Will this hanger give a correct gas gauge reading?
Its empty float height and float retention match OE specifications, which is meant to give a correct gas gauge reading.
Do the metal tubes on this Delphi hanger rattle against the tank?
No. The metal tubes are routed clear of the tank at every point, so there is no contact to cause noise or vibration.
Does Delphi HP10283 replace OE number 17040-SV1-L01?
Yes. 17040-SV1-L01 is on the Interchange line for Delphi HP10283, along with 17040-SV1-L02 and 951-0004.
