Delphi HP10196 fuel pump and sender assembly for the 2004 Ford E-450 Super Duty V8 5.4L, the 2004-2008 E-450 Super Duty V10 6.8L, the 2006-2008 E-450 Super Duty V8 5.4L and other vehicles is a Delphi fuel pump on a hanger that sends fuel from the tank to the engine. A float arm on the assembly reports the fuel level to the gauge.
- Delphi pump designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never contact the tank, which removes noise and vibration during operation
- Empty float height and float retention set for a correct gas gauge reading
- Validated and tested for its application
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi HP10196 fuel pump and sender assembly
- Also called: fuel pump hanger assembly
- Fits: 2004 Ford E-450 Super Duty V8 5.4L, the 2004-2008 E-450 Super Duty V10 6.8L, the 2006-2008 E-450 Super Duty V8 5.4L and other vehicles
- Condition: New
A fuel gauge that reads wrong, hard starting or a whine from the tank can come from this assembly, but also from other fuel system parts. With the engine off, look at the fuel pump fuse first, and have a shop test fuel pressure before replacing anything. If the pump or sender is the cause, this Delphi fuel pump replacement covers both.
Fits
This assembly also fits the 2004-2008 Ford E-150 V8 4.6L or 5.4L and the 2004-2008 Ford E-250 V8 4.6L or 5.4L, at one assembly per vehicle.
Specifications
- Quantity per vehicle: 1
- Type: fuel pump hanger assembly with float arm
- Condition: New
In the box
One fuel pump and sender assembly with float arm, and one instruction sheet.
Installation notes
- Check and clean the fuel tank before installing.
- An instruction sheet comes with the part for the steps.
Interchange: 4C2Z 9H307-AB · 5C2Z 9H307-A · 6C2Z 9H307-AA · PFS-303 · 150158-A
4010482 · E2365S · E2515 · DHP10196 · F1376A · 69172 · HS2510436 · P76548H · P76548S · RE0904S · C0092H · A30214 · SP1199 · SP2088H · USEP2365S
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4010482, E2365S, E2515, DHP10196, F1376A, 69172, HS2510436, P76548H, P76548S, RE0904S, 4C2Z 9H307-AB, 5C2Z 9H307-A, 6C2Z 9H307-AA, PFS-303, C0092H, A30214, SP1199, SP2088H, 150158-A, USEP2365S
Frequently Asked Questions
Will this E-150 fuel pump fit a 2004-2008 Ford E-150 with the V8 4.6L or 5.4L?
Yes. Delphi HP10196 fits the 2004-2008 Ford E-150 with either the V8 4.6L or 5.4L, one per vehicle. If your car is not named here, look it up in the "Vehicles it fits" section.
What comes with this Delphi fuel pump assembly?
Delphi HP10196 arrives as one fuel pump and sender assembly with its float arm, plus an instruction sheet.
Does this fuel pump and sender assembly set the float height for the fuel gauge?
Yes. The empty float height and float retention on this fuel pump and sender assembly are set to give a correct gas gauge reading.
Will the metal tubes on this fuel pump and sender assembly touch the tank?
No. The metal tubes are routed so they do not contact the tank at any point, which removes noise and vibration during vehicle operation.
Does Delphi HP10196 replace 6C2Z 9H307-AA?
Yes. 6C2Z 9H307-AA is one of the numbers listed for Delphi HP10196, along with 4C2Z 9H307-AB, PFS-303 and 150158-A.
