Delphi HP10244 fuel pump and sender assembly for the 2000 Mazda B4000 V6 4.0L moves fuel from the tank to the engine and reports the fuel level to the gauge. This Delphi fuel pump is built to Delphi's OE standards.
- Delphi pump designed to operate under extreme temperatures with quick engine starts
- Metal tubes routed so they never touch the tank, which removes noise and vibration during driving
- Empty float height and float retention set for a correct gas gauge reading
- Delphi fuel pump assembly that helps restore fast pressure performance and system integrity
- Lower amperage draw puts less load on the vehicle's electrical system
Quick facts
- Part: Delphi HP10244 fuel pump and sender assembly
- Fits: 2000 Mazda B4000 V6 4.0L
- Condition: New
Hard starting, stalling or a fuel gauge that reads wrong can mean the pump or sender is wearing out. Before you replace the assembly, rule out the fuel pump fuse, relay and wiring, because a fault in any of them can also leave the engine without fuel.
Fits
It fits the 2000 Mazda B4000 V6 4.0L, and this vehicle takes one.
Specifications
Fit and size
- Engine: V6-4.0L
- Quantity per vehicle: 1
Build and materials
- Construction: hanger assembly with float arm and seal
- Condition: New
In the box
One fuel pump and sender assembly with float arm, one seal, two retainer clips and one instruction sheet.
Installation notes
- Check and clean the fuel tank during installation.
- An instruction sheet comes with the part for the steps.
Interchange: 950-0165 · 953-4105 · 1F22-13-350B · 1F22-13-350C
4011056 · E2207S · E2270S · E2471 · DHP10244 · 69128 · P74211 · P88004 · A30178 · E16009 · SP1113 · SP2270H
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
4011056, E2207S, E2270S, E2471, DHP10244, 69128, P74211, P88004, 950-0165, 953-4105, A30178, E16009, 1F22-13-350B, 1F22-13-350C, SP1113, SP2270H
Frequently Asked Questions
Is this a 2000 Mazda B4000 V6 4.0L fuel pump with the float arm included?
Yes. Delphi HP10244 is a fuel pump and sender assembly for the 2000 Mazda B4000 V6 4.0L, and it comes with the float arm.
Do the seal and retainer clips come with this fuel pump and sender assembly?
Yes. The box holds the assembly with its float arm, one seal, two retainer clips and an instruction sheet.
Will the gauge read correctly with this Delphi fuel pump replacement?
Delphi HP10244 has its empty float height and float retention set to OE specifications, which is meant to give a correct gas gauge reading.
How can I tell this fuel pump and sender assembly is wearing out?
A whine from the tank, stalling or a gauge that jumps can come from wear in the pump or sender. A shop can test fuel pressure to confirm.
Does Delphi HP10244 cross to number 950-0165?
Yes. 950-0165 is on the interchange list for Delphi HP10244, along with 953-4105 and 1F22-13-350B.
