Delphi FG0195 fuel pump module for the 1991-1995 Dodge Grand Caravan V6 3.3L, the 1992-1995 Grand Caravan V6 3.0L, the 1994-1995 Grand Caravan V6 3.8L and other vehicles pumps fuel from the tank to the engine. This Delphi fuel pump module assembly is built to OE standards. Some catalogs list it as a fuel pump assembly.
- Empty float height and float retention held to specification for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested, then matched to the right vehicle application
- Design and durability behind lower failure rates
Quick facts
- Part: Delphi FG0195 fuel pump module
- Also called: fuel pump assembly
- Fits: the 1991-1995 Dodge Grand Caravan V6 3.3L, the 1992-1995 Grand Caravan V6 3.0L, the 1994-1995 Grand Caravan V6 3.8L and other vehicles
- Condition: New
A weak module can show up as hard starting, stalling or a gas gauge that reads wrong. Other fuel-system faults produce similar symptoms, so rule them out first; a shop can run a fuel pressure test, and a look at the fuel pump fuse and relay with the key off is a quick first step. If the module is the cause, this one replaces it.
Fits
The 1991-1993 Chrysler Town & Country V6 3.3L, the 1994-1995 Town & Country V6 3.8L and the 1991-1995 Dodge Caravan 4-cylinder 2.5L, V6 3.0L or 3.3L are among the vehicles it fits. Each vehicle takes one module. If your vehicle isn't named here, look up its year and engine in the "Vehicles it fits" section.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump module with float arm, a seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet in the box covers the installation steps.
Frequently Asked Questions
Does the Delphi fuel module fit the 1991-1993 Chrysler Town & Country V6 3.3L?
Yes. Delphi FG0195 fits the 1991-1993 Chrysler Town & Country V6 3.3L and the 1994-1995 Town & Country V6 3.8L.
Is a float arm included with this fuel pump module?
Yes. Delphi FG0195 comes with the float arm, a seal and an instruction sheet.
How does the float on Delphi FG0195 affect the gas gauge reading?
Its empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
What should I do to the fuel tank before installing this fuel pump module?
Check and clean the fuel tank first. The instruction sheet that comes with Delphi FG0195 covers the installation steps.
Will the Delphi module put less load on the vehicle's electrical system?
Yes. Delphi FG0195 has a lower amperage draw, so it puts less load on the vehicle's electrical system.
