Delphi FG0847 fuel pump module for the 2004-2008 Ford F-150 V8 4.6L or 5.4L, the 2006-2008 F-150 V6 4.2L and other vehicles moves fuel from the tank to the engine. Some call it a fuel pump assembly; it also carries the float arm that feeds the gas gauge.
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested, then matched to the right vehicle application
- Design and durability for lower failure rates
Quick facts
- Part: Delphi FG0847 fuel pump module
- Also called: fuel pump assembly
- Fits: 2004-2008 Ford F-150 V8 4.6L or 5.4L, the 2006-2008 F-150 V6 4.2L and other vehicles
- Condition: New
Hard starting, a whine from the tank area or an odd gas gauge reading can mean the module is failing, though they can also come from other things. Before you replace the module, rule out a blown fuse, a relay or a clogged filter; a shop can test fuel pressure.
Fits
This Delphi fuel pump module fits the 2004-2008 Ford F-150 V8 4.6L or 5.4L, the 2006-2008 F-150 V6 4.2L and the 2007-2008 Lincoln Mark LT V8 5.4L. The 2007-2008 Lincoln Mark LT V8 5.4L takes one, as does each F-150 engine above, and this listing is a single module.
Specifications
Fit and size
- Quantity per vehicle: 1
- Sold individually: one module per listing
Build and materials
- Float arm: included
- Seal: included
- Condition: New
In the box
One fuel pump module with float arm, one seal and an instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet in the box gives the installation steps.
Frequently Asked Questions
Is the Delphi fuel pump module assembly FG0847 right for a 2004-2008 Ford F-150 V8 4.6L or 5.4L?
Yes. Delphi FG0847 fits the 2004-2008 Ford F-150 V8 4.6L or 5.4L and the 2006-2008 F-150 V6 4.2L, with one module per truck.
Does this fuel pump module come with the float arm and a seal?
Yes. The Delphi FG0847 module comes with the float arm, a seal and an instruction sheet.
Will the float on the Delphi fuel module give a correct fuel gauge reading?
Yes. Empty float height and float retention are set to match OE specifications, which is meant to give a correct gas gauge reading.
Does the Delphi module put much load on the electrical system?
This module has a lower amperage draw, so it puts less load on the vehicle's electrical system.
Do I need to clean the tank before installing this fuel pump module?
Yes. Check and clean the fuel tank before installing the module, and use the instruction sheet that comes with it for the steps.
