Delphi FG1053 left fuel pump module for the 2006-2010 Dodge Charger V6 2.7L or 3.5L, the 2006-2016 Charger V8 5.7L, the 2011-2014 Charger V6 3.6L and other vehicles moves fuel from the tank toward the engine. This Delphi fuel pump module assembly is also sold as a fuel pump assembly.
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested, then matched to the right vehicle application
- Design and durability that give lower failure rates
Quick facts
- Part: Delphi FG1053 fuel pump module
- Also called: fuel pump assembly
- Fits: the 2006-2010 Dodge Charger V6 2.7L or 3.5L, the 2006-2016 Charger V8 5.7L, the 2011-2014 Charger V6 3.6L and other vehicles
- Position: Left
- Condition: New
Hard starting, sputtering under load or a gas gauge that reads wrong can mean the module is wearing out. Those signs can also come from a clogged filter or a gauge fault, so have a shop test fuel pressure to confirm the cause before you replace it.
Fits
It is listed for a wide range of Chrysler and Dodge models, including the 2005-2016 Chrysler 300 V8 5.7L and the 2009-2016 Dodge Challenger V8 5.7L. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
- Position: Left
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump module with float arm, seal and an instruction sheet. This listing is one left-side module, and the left side takes one; the other side is ordered separately.
Installation notes
- Check and clean the fuel tank before fitting the module.
- The instruction sheet in the box covers the installation steps.
Interchange: 5136 022AF · 5136 022AG · 5136 022AH · 5136 022AI · 5136 022AJ · 5136 022AK · 5136 022AL
4010554 · E7192M · DFG1053 · F3103A · M2496270 · P76609M · 5136022AM · RL136022AG · RL136022AH · C0485M · A30378 · SP7029M · SP7048M · USEP7192M
This part cross-references / interchanges with the following part numbers:
4010554, E7192M, DFG1053, F3103A, M2496270, P76609M, 5136 022AF, 5136 022AG, 5136 022AH, 5136 022AI, 5136 022AJ, 5136 022AK, 5136 022AL, 5136022AM, RL136022AG, RL136022AH, C0485M, A30378, SP7029M, SP7048M, USEP7192M
Frequently Asked Questions
Does the Delphi FG1053 fit the 2005-2016 Chrysler 300 V8 5.7L?
Yes. Delphi FG1053 is listed as a left-side module for the 2005-2016 Chrysler 300 V8 5.7L. For other engines or models, use the "Vehicles it fits" section.
What comes with this Delphi fuel module?
Delphi FG1053 comes with a float arm, a seal and an instruction sheet. The listing is one left-side module; the left side takes one, and the other side is ordered separately.
How does this module keep the fuel gauge reading correct?
Its empty float height and float retention match OE specifications, which is what gives the gas gauge a correct reading.
Should I clean the fuel tank when installing the FG1053?
Yes. Check and clean the fuel tank before the new module goes in, and follow the included instruction sheet for the steps.
Does this Delphi module replace number 5136 022AF?
Yes. 5136 022AF is one of the numbers on the Interchange line, along with 5136022AM and E7192M.
