Delphi FG1291 fuel pump module for the 2010-2015 Chevrolet Camaro V8 6.2L moves fuel from the tank to the engine. This Delphi fuel pump module assembly is built to Delphi's OE standards.
- Empty float height and float retention match specifications, for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated, tested and matched to the right vehicle application
- Design and durability give lower failure rates
Quick facts
- Part: Delphi FG1291 fuel pump module
- Also called: fuel pump assembly
- Fits: 2010-2015 Chevrolet Camaro V8 6.2L
- Condition: New
A weak fuel pump assembly can show up as hard starting, sputtering under load or a whine from the tank. Before you replace the module, rule out the fuse, the relay and the wiring, since a fault in any of them can produce similar symptoms. If the module is the cause, this one replaces it.
Fits
It fits the 2010-2015 Chevrolet Camaro V8 6.2L, which takes one.
Specifications
- Quantity per vehicle: 1
- Engine: V8 6.2L
- Condition: New
In the box
One fuel pump module assembly. The float arm, seal and instruction sheet are not included.
Installation notes
- Check and clean the fuel tank before installing the module.
Interchange: M100080 · M10237 · MU1896 · MU1959 · 4011330 · E4007M · CFG1291 · P76848M · 13585454 · 13592335 · 19208719 · A46025 · SP6681M · USEP4007M
This part cross-references / interchanges with the following part numbers:
M100080, M10237, MU1896, MU1959, 4011330, E4007M, CFG1291, P76848M, 13585454, 13592335, 19208719, A46025, SP6681M, USEP4007M
Frequently Asked Questions
Does the Delphi FG1291 fit a 2010-2015 Chevrolet Camaro V8 6.2L?
Yes. Delphi FG1291 is listed for the 2010-2015 Chevrolet Camaro V8 6.2L, and that car takes one.
Will this Delphi fuel pump module come with the float arm and seal?
No. Delphi FG1291 is the module assembly only; the float arm, seal and instruction sheet are not included.
How does the Delphi fuel module keep the gas gauge reading correct?
This module's empty float height and float retention match OE specifications, which supports a correct gas gauge reading.
Do I need to clean the tank before installing the Delphi module?
Yes. The fuel tank should be checked and cleaned before this module goes in.
Is 13585454 one of the numbers Delphi FG1291 replaces?
Yes. 13585454 is another brand's or OE number that Delphi FG1291 replaces.
