Delphi FG1304 fuel pump module for the 2009-2012 Chevrolet Colorado 4-cylinder 2.9L, 5-cylinder 3.7L or V8 5.3L and other vehicles delivers fuel from the tank to the engine. It is also sold as a fuel pump assembly, and Delphi builds all of its fuel pumps to its OE standards.
- Empty float height and float retention that give a correct gas gauge reading
- Lower amperage draws less load on the vehicle's electrical system
- Delphi fuel pump module validated and tested, then matched to its application
- Design and durability that give lower failure rates
Quick facts
- Part: Delphi FG1304 fuel pump module
- Also called: fuel pump assembly
- Fits: 2009-2012 Chevrolet Colorado 4-cylinder 2.9L, 5-cylinder 3.7L or V8 5.3L and other vehicles
- Condition: New
A gas gauge that reads wrong, hard starting or sputtering can point to this module. Those signs alone do not prove it is the problem, since a blown fuel pump relay can look the same. If the module is the cause, this one replaces it. One module per vehicle is all it takes.
Fits
This module fits the 2009-2012 Chevrolet Colorado and the 2009-2012 GMC Canyon, each with the 4-cylinder 2.9L, 5-cylinder 3.7L or V8 5.3L.
Specifications
- Quantity per vehicle: 1
- Condition: New
In the box
One fuel pump module. The float arm, seal and instruction sheet are not included.
Installation notes
- Check and clean the fuel tank before installing the module.
Interchange: M10231 · MU1885 · 4010714 · E3791M · DFG1304 · 67792 · 69988 · P76833M · 19207813 · 19258174 · 19258175 · 19370386 · C0298M · A33173 · SP6648M
This part cross-references / interchanges with the following part numbers:
M10231, MU1885, 4010714, E3791M, DFG1304, 67792, 69988, P76833M, 19207813, 19258174, 19258175, 19370386, C0298M, A33173, SP6648M
Frequently Asked Questions
Is this Delphi fuel pump module assembly right for the 2009-2012 GMC Canyon 4-cylinder 2.9L, 5-cylinder 3.7L or V8 5.3L?
Yes. Delphi FG1304 fits the 2009-2012 GMC Canyon with the 4-cylinder 2.9L, 5-cylinder 3.7L or V8 5.3L, and each vehicle takes one module.
Does the Delphi fuel module include the float arm and seal?
No. The Delphi FG1304 is the fuel pump module only, without the float arm, seal or instruction sheet.
Does the Delphi module match OE float height?
Yes. Its empty float height and float retention match OE specifications, which supports a correct gas gauge reading.
How can I tell a fuel pump module is wearing out when the gas gauge reads wrong?
A gas gauge that reads wrong, a long crank before the engine starts, or sputtering can be signs of a weak module. A shop can test fuel delivery to confirm.
Does the Delphi FG1304 fuel pump module have a lower amperage draw?
Yes. The Delphi FG1304 has lower amperage, which draws less load on the vehicle's electrical system.
