Delphi FG1321 fuel pump module for the 2011-2019 Ford F-59 Commercial Stripped Chassis V10 6.8L, the 2020-2024 F-59 Commercial Stripped Chassis V8 7.3L and other vehicles delivers fuel from the tank to the engine. Every Delphi fuel pump module is built to Delphi's OE standards.
- Empty float height and float retention are set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated, tested and matched to the right application
Quick facts
- Part: Delphi FG1321 fuel pump module
- Also called: fuel pump assembly
- Fits: the 2011-2019 Ford F-59 Commercial Stripped Chassis V10 6.8L, the 2020-2024 F-59 Commercial Stripped Chassis V8 7.3L and other vehicles
- Condition: New
A gas gauge that reads wrong, hard starting or stalling can mean the module is wearing out, though a fuel or electrical fault elsewhere can look identical. Compare the gauge with the fuel you actually add at the pump, and leave pressure testing to a shop. If a worn fuel pump assembly is the cause, this module replaces it.
Fits
The vehicles it fits include the 2011-2016 Ford F-350 Super Duty V8 6.2L and the 2011-2016 F-450 Super Duty V10 6.8L, and each takes one.
Specifications
- Quantity per vehicle: 1
- Condition: New
- Float arm: included
- Seal: included
- Empty float height and float retention: match OE specifications
In the box
One fuel pump module with float arm, seal and instruction sheet.
Installation notes
- Check and clean the fuel tank before installing the module.
- The instruction sheet in the box covers the steps.
Interchange: BC3Z 9A299-D · BC3Z 9H307-C · PFS-557 · PS-408
4010768 · E2584M · DFG1321 · P77207M · P77280M · SP2481M · USEP2584M
This part cross-references / interchanges with the following part numbers:
4010768, E2584M, DFG1321, P77207M, P77280M, BC3Z 9A299-D, BC3Z 9H307-C, PFS557, PS408, PFS-557, PS-408, SP2481M, USEP2584M
Frequently Asked Questions
Is the Delphi fuel module right for the 2011-2016 Ford F-350 Super Duty V8 6.2L?
Yes. Delphi FG1321 fits the 2011-2016 Ford F-350 Super Duty V8 6.2L, one per vehicle. For a vehicle not named here, check the "Vehicles it fits" section.
What is included with the Delphi fuel pump module assembly?
The Delphi FG1321 comes as a fuel pump module assembly with a float arm, a seal and an instruction sheet.
Does the Delphi module keep the gas gauge reading correct?
Yes. Its empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Should I clean the fuel tank when installing this fuel pump module?
Yes. Check and clean the fuel tank during installation, and use the instruction sheet in the box for the steps.
Does the Delphi FG1321 pump put less load on the electrical system?
Yes. Delphi FG1321 runs at lower amperage, so it draws less load on the vehicle's electrical system.
