Delphi FG2098 fuel pump module for the 2008 Buick Lucerne V6 3.8L or V8 4.6L and other vehicles delivers fuel from the tank to the engine.
- Empty float height and float retention set for a correct gas gauge reading
- Lower amperage draw puts less load on the vehicle's electrical system
- Validated and tested for the application it is built for
- Durable design intended to lower failure rates
Quick facts
- Part: Delphi FG2098 fuel pump module
- Also called: fuel pump assembly
- Fits: 2008 Buick Lucerne V6 3.8L or V8 4.6L and other vehicles
- Condition: New
Hard starting, stalling or a fuel gauge that reads wrong can mean the pump or float in the tank is failing. Before you replace the module, rule out a blown fuse, a faulty relay and damaged wiring, and have a shop test fuel pressure if the cause is unclear. Counter staff may also call this part a fuel pump assembly.
Fits
Delphi FG2098 fits the 2008 Buick Lucerne V6 3.8L or V8 4.6L and the 2008 Cadillac DTS V8 4.6L. It is built to Delphi's OE standards, and its float matches OE specifications. The fuel tank takes a single module, and this listing is one.
Specifications
- Quantity per vehicle: 1
- Construction: pump module with float arm
- Seal: included
- Condition: New
In the box
One fuel pump module with a float arm, a seal and an instruction sheet.
Installation notes
- An instruction sheet comes with the module for the installation steps.
- Check and clean the fuel tank during installation.
Interchange: M100140 · M10165 · MU2172 · 4010666 · E3844M · DFG2098 · 19179795 · 19179796 · 19301262 · 23120358 · SP6643M
This part cross-references / interchanges with the following part numbers:
M100140, M10165, MU2172, 4010666, E3844M, DFG2098, 19179795, 19179796, 19301262, 23120358, SP6643M
Frequently Asked Questions
Is this Delphi fuel pump module right for the 2008 Cadillac DTS V8 4.6L?
Yes. Delphi FG2098 is listed for the 2008 Cadillac DTS V8 4.6L, and also for the 2008 Buick Lucerne V6 3.8L or V8 4.6L.
What comes with this Delphi fuel pump module assembly?
Delphi FG2098 comes with a float arm, a seal and an instruction sheet.
Does the Delphi fuel module match the OE float height?
Yes. Empty float height and float retention on this fuel pump module match OE specifications, which supports a correct gas gauge reading.
Should I clean the tank when installing the Delphi module?
Yes. Check and clean the fuel tank when you install this module, and follow the instruction sheet that comes with it for the steps.
What signs can mean this fuel pump module is failing?
Hard starting, stalling or a wrong fuel gauge reading can all mean the pump or float is failing. A shop can test fuel pressure to confirm.
