Delphi Fuel Pump Module Assembly P/N:FG0271
Delphi FG2745 fuel pump module for the 2014-2017 Fiat 500 4-cylinder 1.4L moves fuel from the tank to the engine. This Delphi fuel pump module assembly, also called a fuel pump assembly, is built to the maker's own OE standards.
Hard starting, stalling or a fuel gauge that reads wrong can point to a worn fuel pump module. Any one of these alone does not prove the module is the problem, because contaminated fuel is another common cause.
This fuel pump module is a direct-fit replacement for the 2012 and 2014-2017 Fiat 500 4-cylinder 1.4L.
This listing is one fuel pump module, and the vehicle takes one.
Interchange: 6810 4562AA · 6810 4562AB · 6810 4562AC · 6810 4563AA
P77071M · RL104562AA · SP7107M
This part cross-references / interchanges with the following part numbers:
Does the Delphi FG2745 fit the 2014-2017 Fiat 500 4-cylinder 1.4L?
Yes, Delphi FG2745 is listed for the 2012 and 2014-2017 Fiat 500 4-cylinder 1.4L, and each takes one.
Will this fuel pump module give a correct gas gauge reading?
Yes. The empty float height and float retention match OE specifications, which gives a correct gas gauge reading.
Does the Delphi fuel module FG2745 draw less current from the electrical system?
Yes. Delphi FG2745 has a lower amperage draw, so it puts less load on the vehicle's electrical system.
How can I tell if the fuel pump module is going bad?
Long cranking, stalling or a gauge that reads wrong can be signs. A shop can test fuel pressure to confirm.
Should I clean the tank before installing the Delphi module?
Yes. Delphi FG2745 should go into a fuel tank that has been checked and cleaned first.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.