Delphi TA2910 right outer tie rod end for the 2005-2011 Kia Rio and other vehicles connects the steering linkage to the steering knuckle. It is also called a steering tie rod end, and its ball stud lets the joint pivot as the wheel turns and the suspension moves.
- Tested below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Fatigue tested to avoid failure
- Necessary accessories included for a complete job
- Anti-corrosion protection applied to each part
Quick facts
- Part: Delphi TA2910 tie rod end
- Also called: steering tie rod end
- Fits: 2005-2011 Kia Rio and other vehicles
- Position: Right outer
- Condition: New
Loose steering, a clunk over bumps or uneven tire wear can mean the tie rod end is worn, though a worn ball joint or wheel bearing can be behind the same signs, so find the cause first. Left and right outer tie rod ends are normally replaced as a pair; this listing is one, for the right side, and the left side is a separate part.
Fits
It is a direct-fit replacement for the 2005-2011 Kia Rio and the 2006-2011 Kia RIO5, and the right outer position takes one tie rod end on each.
Specifications
Fit and size
- Position: Right outer
- Quantity per vehicle: 1 for the right outer position
Build and materials
- Condition: New
- Corrosion protection: anti-corrosion treatment on each part
Interchange: 101-5403 · 56820-1G000
ER04014 · TO60032 · TO60032XL · TO63042 · TO63042XL · ES800349 · GS90611 · MS90611 · JTE2147
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-5403, ER04014, 56820-1G000, TO60032, TO60032XL, TO63042, TO63042XL, ES800349, GS90611, MS90611, JTE2147
Frequently Asked Questions
Is Delphi TA2910 a tie rod for the 2005-2011 Kia Rio?
Yes. Delphi TA2910 is a right outer tie rod end for the 2005-2011 Kia Rio and the 2006-2011 Kia RIO5. The left side is a separate part.
Does a Delphi tie rod like the TA2910 go on the left or the right side?
Delphi TA2910 is for the right outer position. The left side takes its own tie rod end, ordered separately, and both sides are normally replaced together.
What testing is the Delphi track rod end built to withstand?
It is tested below -40 degrees C and above 120 degrees C, and exposed to 720 hours of salt spray. The ball studs are machined to micron tolerances.
How do I spot a worn right outer tie rod end?
Loose or vague steering, a clunk over bumps and uneven tire wear can all mean a worn tie rod end. A shop can measure the play on the car.
Does the Delphi tie rod end have corrosion protection?
Yes. Anti-corrosion protection is applied to each part, and this tie rod end is fatigue tested to avoid failure.
