Delphi TA3362 tie rod end for the 2018-2019 Hyundai Sonata and other vehicles is the ball-and-socket joint that links the steering linkage to the wheel's steering knuckle, so steering input reaches the wheel.
- Tested at temperatures below -40 degrees C and over 120 degrees C, and exposed to 720 hours of salt spray
- Dimensional and material analysis for compatibility between the OE and aftermarket part
- Ball studs machined to micron tolerances for durability and smooth joint operation
- Delphi tie rods are fatigue tested to avoid failure
- Anti-corrosion protection on each part
- Includes the necessary accessories for a complete job
A worn steering tie rod end can show up as looseness in the steering or uneven tire wear. Worn ball joints, control arm bushings or wheel bearings can be behind those signs too, so pin down which part is at fault before you buy. This listing is a single right outer tie rod end, and both sides are usually replaced together.
The 2018-2019 Hyundai Sonata, 2020 Kia Optima and 2020-2022 Hyundai Palisade all take this tie rod end, one per vehicle, and so do other models. Open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: right outer
- Quantity per vehicle: 1
Build and materials
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied to each part
Interchange: 101-8408
56825G8090 · KTR4563 · MS90673
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-8408, 56825G8090, KTR4563, MS90673
Frequently Asked Questions
Is TA3362 the right 2018-2019 Hyundai Sonata tie rod replacement?
Yes. Delphi TA3362 is listed for the 2018-2019 Hyundai Sonata as a right outer tie rod end. Open the "Vehicles it fits" section to check your exact model and engine.
Does the Delphi TA3362 also fit the 2020 Kia Optima or the 2020-2022 Hyundai Palisade?
Yes. Delphi TA3362 is listed for both the 2020 Kia Optima and the 2020-2022 Hyundai Palisade, with one needed per vehicle.
Does the Delphi tie rod end come with accessories?
Yes. Delphi includes the accessories needed for a complete job with this tie rod end.
Is Delphi TA3362 a right or left tie rod end?
It is a right outer tie rod end. Delphi TA3362 is sold one per listing, so a left outer end would be ordered separately.
Before reading a Delphi tie rod review, what testing is behind TA3362?
Delphi tie rods, including TA3362, are fatigue tested to avoid failure, and Delphi's parts are exposed to 720 hours of salt spray and withstand temperatures below -40 degrees C and over 120 degrees C.
