The Delphi TA3505 tie rod end for the 2019-2025 BMW 330i xDrive and other vehicles is the front right outer joint that connects the tie rod to the steering knuckle. It is also called a steering tie rod end.
- Tested below -40 degrees C and over 120 degrees C, and through 720 hours of salt spray.
- Ball studs are machined to micron tolerances for durability and smooth joint operation.
- Fatigue tested to avoid failure.
- Anti-corrosion protection is applied to each part.
A worn tie rod end can show up as loose steering, a knock when turning or uneven front tire wear. Before you replace it, rule out a worn wheel bearing or control arm bushing, because those parts can produce a similar feel at the wheel and might need replacing too. This listing is one piece, and both sides are normally replaced together.
Delphi TA3505 is listed for a wide range of BMW models, including the 2019-2025 BMW Z4 and the 2020-2025 BMW M340i. If your car is not named here, open the "Vehicles it fits" section to check your exact model and engine.
Specifications
Fit and size
- Position: Front right outer
- Quantity per vehicle: 1
- Quantity per listing: 1
Build and materials
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied to each part
In the box: one tie rod end plus the accessories needed for the job. The vehicle takes one in this position, so this listing covers it.
Interchange: 32 10 6 887 402 · 32105A38DE8 · 1018756 · KTR4386 · ES801736 · MS106255
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
32105A38DE8, 32 10 6 887 402, 1018756, KTR4386, ES801736, MS106255
Frequently Asked Questions
Does the Delphi TA3505 tie rod end fit the 2019-2025 BMW Z4?
Yes. Delphi TA3505 is listed for the 2019-2025 BMW Z4 and the 2020-2025 BMW M340i, as the front right outer tie rod end.
Does the Delphi TA3505 come with accessories?
Yes. Delphi includes the accessories needed for the job with this single tie rod end. The vehicle takes one in this position.
Is the Delphi TA3505 track rod end the front right outer one?
Yes. Delphi TA3505 is the front right outer tie rod end, sold as one piece, so the left side is a separate part.
What are signs the front right outer tie rod end on a BMW is wearing out?
A worn tie rod end can show up as vibration through the steering wheel, the car pulling to one side or one tire edge wearing faster. A shop can check the joint for play.
Besides a Delphi tie rod review, what testing is behind the TA3505?
Delphi tie rods are fatigue tested to avoid failure. They withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray.
