Delphi TA5445 tie rod end for the 2015 Hyundai Sonata and other vehicles is the right outer joint that links the steering linkage to the steering knuckle.
- Withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray.
- Extensive dimensional and material analysis backs its compatibility with the OE part.
- Delphi tie rod end ball studs are machined to micron tolerances for durability and smooth joint operation.
- Each Delphi tie rod is fatigue tested to avoid failure.
- Anti-corrosion protection is applied to each part.
A worn steering tie rod end can show up as loose or wandering steering, a knock when turning, or uneven tire wear. Those signs alone do not prove this part is the problem, since a worn ball joint can feel much the same.
The 2016-2018 Kia Optima, 2016-2018 Kia Sorento and 2015 Hyundai Sonata all fit this part, along with further Hyundai and Kia models. If your car is not one of these, open the "Vehicles it fits" section and look up your exact model and engine. This listing is the right outer end only, and the left outer end on the same axle is normally replaced at the same time.
Specifications
- Position: right outer
- Quantity per vehicle: 1
- Pieces per listing: 1
In the box
One tie rod end with the accessories needed for a complete job, which matches the quantity of one per vehicle in the fitment.
Interchange: 101-7843 · 613.51042 · 56825-C1090
56825D3000 · 56825D7000 · 56825D7500 · KTR4098 · KTR4567 · TO60232 · ES801230 · GS90634 · MS90661
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-7843, 613.51042, 56825D3000, 56825D7000, 56825D7500, KTR4098, KTR4567, 56825-C1090, TO60232, ES801230, GS90634, MS90661
Frequently Asked Questions
Can I use the Delphi TA5445 as a 2015 Hyundai Sonata tie rod replacement?
Yes. Delphi TA5445 fits the 2015 Hyundai Sonata, and it also fits the 2016-2018 Kia Optima and the 2016-2018 Kia Sorento.
Is the Delphi TA5445 a left or right tie rod end?
Delphi TA5445 is the right outer tie rod end. This listing is a single piece, so the left outer end is ordered separately.
Does the Delphi TA5445 come with accessories for the install?
Yes, this tie rod end ships with the accessories needed for a complete job. The listing holds one tie rod end.
Before reading a Delphi tie rod review, what should I know about how the TA5445 is tested?
Delphi TA5445 is exposed to temperatures below -40 degrees C and over 120 degrees C and to 720 hours of salt spray. It is also fatigue tested to avoid failure.
Is Delphi TA5445 the same as number 56825-C1090?
Yes, 56825-C1090 is one of the numbers Delphi TA5445 replaces. Others include 101-7843, 613.51042 and KTR4567.
