Delphi TA5635 inner tie rod end for the 2010-2016 Ford Taurus and other vehicles passes steering input from the steering gear out to the wheel. This Delphi tie rod end sits on the inner side of the steering linkage.
- Tested for OE performance: withstands temperatures below -40 degrees C and over 120 degrees C, plus 720 hours of salt spray
- Ball studs are machined to micron tolerances for durability and smooth joint operation
- Delphi tie rods are fatigue tested to avoid failure
- Anti-corrosion protection is applied to each part
A worn inner tie rod end can show up as loose or wandering steering, a clunk in turns or uneven tire wear. Before you replace it, rule out the outer tie rod end, ball joints and wheel bearings, since worn parts there can feel much the same.
The 2010-2016 Ford Taurus, 2010-2016 Lincoln MKS and 2010-2015 Ford Flex are among the cars this tie rod end fits, and each takes two, so order two and fit them together. Driving something else? Search for your car under the "Vehicles it fits" section.
Specifications
Fit and size
- Position: inner
- Quantity per vehicle: 2
Build and materials
- Ball studs: machined to micron tolerances
- Corrosion protection: anti-corrosion protection applied to each part
In the box
The tie rod end and the necessary accessories for a complete job.
Interchange: 612.61141
AA5Z3280B · TI85340 · TI86050 · EV800776 · GS40717 · MS40717 · MS40761 · JAR1234
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
612.61141, AA5Z3280B, TI85340, TI86050, EV800776, GS40717, MS40717, MS40761, JAR1234
Frequently Asked Questions
Is the Delphi TA5635 the right tie rod for a 2010-2016 Ford Taurus?
Yes, the Delphi TA5635 inner tie rod end fits the 2010-2016 Ford Taurus, and the car takes two. For other cars, search the "Vehicles it fits" section.
What does the Delphi TA5635 inner tie rod end come with?
Delphi supplies the accessories needed for a complete job along with the TA5635 inner tie rod end.
What testing should I look for in a Delphi tie rod review of the TA5635?
The TA5635 goes through fatigue testing aimed at preventing failure, and its ball studs are machined to micron tolerances for durability and smooth joint operation.
How can I tell if a steering tie rod end is worn?
Play in the steering wheel, a knock at low-speed turns or uneven tire wear can mean a worn tie rod end. A shop can test it and tell you which part is at fault.
Is a Delphi track rod end the same as the TA5635?
Yes, track rod end is another name for a tie rod end. The Delphi TA5635 is the inner one, and the fitment takes two per vehicle.
