Tie Rod End for 2015-2020 Honda Fit - Delphi TA6380

Delphi TA6380 tie rod end for the 2015-2020 Honda Fit is a left outer steering joint that connects the tie rod to the steering knuckle. Also called a steering tie rod end, it carries steering movement out to the wheel.

• Delphi tie rods are fatigue tested to avoid failure.
• The ball studs are machined to micron tolerances for durability and smooth joint operation.
• The part withstands temperatures below -40 degrees C and over 120 degrees C and is exposed to 720 hours of salt spray.
• Dimensional and material analysis aims for close compatibility with the OE part.

A worn tie rod end can show up as loose or wandering steering, a clunk over bumps or uneven tire wear. Worn ball joints or wheel bearings can feel similar, so with the car parked and the engine off, look at the joint for cracks or leaks before you pick the cause.

This is a direct-fit tie rod for the 2015-2020 Honda Fit, sold one per listing. The other side of that axle is normally done at the same time.

Specifications

• Position: left outer
• Quantity per application: 1
• Corrosion protection: anti-corrosion protection applied to each part

In the box: one tie rod end, plus the accessories Delphi includes for a complete job. The fitment calls for one.

Interchange: 101-8298 · 53560-T5R-003
53560T5A003 · KTR4359 · TO59341 · ES801354 · MS60653