Keep your steering tight and your tires tracking true with the Delphi Suspension Ball Joint (TC2686), a front lower ball joint that pivots the control arm to the steering knuckle while carrying suspension loads and locating the wheel. This ball joint drops in as a direct-fit replacement for the 2011-2014 Hyundai Sonata, 2010-2017 Hyundai Tucson, and 2011-2013 Kia Sportage — see the "Vehicles it fits" section for engine-level fitment.
Delphi applies its OE steering expertise to the aftermarket, testing to the extreme for OE performance:
- Forged strength: manufactured with high-quality forgings for increased strength and smooth operation.
- Chloroprene rubber boot: improves durability and helps prevent premature failure by keeping contaminants out of the joint.
- Micron-tolerance machining: machined to micron tolerances for durable, smooth joint operation.
- Anti-corrosion protection: applied to each part for corrosion prevention and enhanced aesthetics.
Delphi validates parts from below -40°C to over 120°C with 720 hours of salt-spray exposure, backed by extensive dimensional and material analysis for OE-to-aftermarket compatibility. Signs this front lower joint may need replacing include clunking on acceleration or over uneven pavement, uneven tire wear, loose or wandering steering, and a torn or cracked boot.
Interchange: 101-7176 · 101-7906 · 610.51005 · 54530-3S000
1017176 · 1017906 · 61051005 · 545303S000 · BJ14065 · BJ60305 · K500239 · K500319 · GS90516 · MS90516 · TXMS90516 · JBJ335
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
101-7176, 101-7906, 610.51005, 54530-3S000, BJ14065, BJ60305, K500239, K500319, GS90516, MS90516, TXMS90516, JBJ335
Frequently Asked Questions
What vehicles does this Delphi ball joint fit?
It is a direct-fit replacement for the 2011-2014 Hyundai Sonata, 2010-2017 Hyundai Tucson, and 2011-2013 Kia Sportage. Check the "Vehicles it fits" section to confirm engine-level fitment for your vehicle.
Where is this ball joint located?
It is a front lower ball joint that connects the control arm to the steering knuckle, carrying suspension loads and letting the wheel pivot and travel.
What are the signs this ball joint may need replacing?
Watch for clunking on acceleration or over bumps, uneven tire wear, loose or wandering steering, and a torn boot. Have the cause diagnosed, since these symptoms can have other sources.
What is the boot made of on this Delphi ball joint?
It uses a chloroprene rubber boot, which Delphi states improves durability and helps prevent premature failure by keeping contaminants out of the joint.
Should I replace both ball joints at once?
Replacing worn suspension components in pairs is often recommended for balanced handling. Consult the vehicle service information for the correct fasteners and whether they may be reused.
